Window Installation in Kings Point — Free In-Home Measure, Written Price

Fast, Reliable Window Installation Across Kings Point

Window installation in Kings Point carries a unique set of rules that most contractors simply don’t understand. The community’s 1970s and 1980s concrete block villas and condominiums still hold thousands of original aluminum single-pane, jalousie, and sliding windows that are now 40 to 50 years old, functionally obsolete, and out of compliance with Palm Beach County’s current Florida Building Code impact mandates. When you call Winslow Windows & Doors at (844) 901-4551, you reach a real person who knows Kings Point’s condo approval process, its HOA aesthetic rules, and exactly which impact-rated replacements the board will accept. We’re licensed, insured, and Ed Winslow’s name is on the door, and on every job we do.

Call (844) 901-4551

Key Takeaways

• Most original Kings Point windows cannot legally be repaired or retrofitted; they must be replaced with impact-rated units under current FBC rules.
• Every replacement must clear the Kings Point condo or HOA architectural review process, which enforces strict frame color and style matching.
• Typical impact window installation in Kings Point runs $800 to $1,800 per opening installed, with whole-home packages from $8,000 to $25,000+.
• Winslow Windows & Doors is state-licensed, insured and bonded, and has served Florida communities since 2011 with the Done Right Promise.
• Call (844) 901-4551 for a free in-home measure and written line-item quote. No trip charge inside the home county.

Why Winslow Windows & Doors Is Kings Point’s Preferred Window Installation Company

Kings Point is not a place where a national chain installer with a different sub every week earns trust. It’s a community of owners who have been through hurricanes, board votes, and more than a few disappointing contractor experiences. We’re a locally owned company, started by Ed Winslow in 2011, with a published address and license number. That transparency matters here. The one down the road.

Our crew works in Kings Point regularly. We know the Villas, the condominium clusters off Kings Point Drive, and the typical window package in a 1980s two-bedroom villa: two bedroom single-hungs or sliders, a living-room picture window or three-lite roller, a kitchen awning or casement, and often a lanai slider or jalousie panel that has been leaking air since the first Bush administration. We also know what the board will say when you apply for replacement. That knowledge saves you time, money, and a possible violation notice.

Every technician who arrives at your door is background-checked and in uniform. You’ll know exactly who’s there before you open the door. And when you call us at (844) 901-4551, a live person answers, 24 hours a day, seven days a week. No voicemail loops. No call centers. That’s the way Ed has run this company since day one.

Our Window Installation Services in Kings Point

This page is a deep dive into the specific window styles we install throughout Kings Point’s condo and villa communities. For an overview of everything we do across the region, see our Window Installation service page.

Single & Double Hung Windows

Single and double hung windows are common in Kings Point’s villas, particularly in bedrooms and second-floor condominium units where vertical sliding saves wall space. The original aluminum single-hung units in these buildings are almost always single-pane with failing balances and rotted wool pile weatherstripping. We typically replace them with PGT or CWS impact-rated single-hung units that match the original bronze or white aluminum frame profile, so your HOA application sails through.

Horizontal Roller Windows

Horizontal roller windows are the workhorse window of Palm Beach County, and Kings Point has thousands of them. In an attached villa, a horizontal roller often sits on a shared wall, meaning the flashing and stucco tie-in on the neighbor side matters as much as the window itself. We’ve pulled plenty of old rollers here and found degraded sealant joints that were quietly feeding water into the adjoining unit. Our installs include proper neighbor-side sealing and stucco tie-in details so the association never gets a call about a leak.

3-Panel Sliding (3-Lite Roller) Windows

Three-panel sliding windows show up all over Kings Point living rooms and lanais. The original 1970s versions were often aluminum frame with single-pane glass and a fixed center panel. Those units cannot meet today’s wind-load requirements, and the Kings Point board will not accept a repair that simply replaces the glass. We install 3-lite rollers with Miami-Dade NOA approval, laminated impact glass, and low-E coatings that cut cooling load noticeably in a west-facing villa.

Casement Windows

Casement windows in Kings Point are frequently found in kitchens and bathrooms, where the crank-out design lets you catch the ocean breeze off the Intracoastal on a February afternoon. The old ones crank with a grunt and seal with a prayer. We install modern casements with multi-point locking hardware, compression gaskets, and impact-rated glass that holds up in the HVHZ wind zone, all in frame colors the board will approve without a second meeting.

Trusted Brands We Service in Kings Point

Winslow Windows & Doors is an authorized installer for PGT, CGI, CWS, and ES Windows, among other premium lines. For Kings Point specifically, we lean on PGT and CWS because their bronze and white aluminum frame options align with the condo association’s aesthetic requirements without forcing a variance. We keep local parts inventory for common Kings Point applications, which means replacement hardware, balances, and weatherstripping for PGT and CGI units get to your door faster than ordering through a big-box installer’s out-of-state warehouse. If you already have a brand in mind, we’ll quote it honestly and install it to manufacturer spec.

Common Window Installation Problems We See in Kings Point Homes

• Jalousie retrofit dead ends. Owners assume their original jalousie windows can be upgraded with impact film or new glass panes, only to discover during permitting that the Florida Building Code requires full replacement. We’ve seen this halt mid-job at more than one Kings Point lanai. The fix is a full replacement with an impact-rated horizontal roller or fixed lite, and we handle the condo paperwork to keep it moving.
• HOA aesthetic review delays. Kings Point’s condo rules require replacement windows to match the original bronze or white aluminum frames. A contractor who installs a white vinyl frame in a bronze-trim building gets the owner a violation notice and a refit bill. We pre-clear frame color and style with the association before we order, so you don’t pay twice.
• Shared-wall sealing failures. Attached villa window replacements that ignore neighbor-side flashing or stucco tie-ins lead to water intrusion into the adjoining unit. That means association disputes and rework. Our installs treat the shared wall as part of the job, not an afterthought.
• Seal failure and frame oxidation from South Florida sun. The intense ultraviolet exposure in Palm Beach County accelerates seal failure and aluminum frame oxidation on 40-year-old windows. Gasket and weatherstripping degradation is a near-universal complaint in Kings Point. Replacing the unit with modern low-E insulated glazing solves the air leak and the heat gain in one shot.

Pricing for Window Installation in Kings Point, FL

What Window Installation Costs in Kings Point

Here are the real anchors for Kings Point’s market, based on what we quote and install here every month:

• Impact windows (standard openings): $800 to $1,500 per window installed
• Impact single-hung windows: $900 to $1,800 per window installed
• Large or custom openings (picture windows, 3-lite rollers, bay conversions): $2,500 to $5,000 per opening
• Whole-home packages (2-bedroom villa): $8,000 to $20,000
• Whole-home packages (larger condominium or multi-opening lanai work): $18,000 to $25,000+

What moves the price in Kings Point is straightforward. Opening count and size come first. Wind zone requirements dictate the design pressure rating, which affects the frame and glass package. Floor height matters because upper-floor units in Kings Point’s low-rise condominiums get more wind exposure and may require higher DP ratings. Frame material matters too; the board’s bronze or white aluminum requirement keeps you in a specific product line. The good news is that we measure, quote, and install with those variables nailed down before you sign anything. Free in-home measure, written quote, no trip charge inside the home county.

Florida Pays You Back

Kings Point homeowners have access to a stack of incentives that offset the cost of impact-rated replacement windows. The My Safe Florida Home program offers matching grants up to $10,000 for qualifying wind-mitigation upgrades, and impact windows are on the approved list. Florida’s sales-tax exemption on impact-resistant windows and doors removes a chunk of the up-front cost at the point of sale. The federal 25C energy credit returns 30% of the product cost, up to $600 per year, on qualifying energy-efficient units. And after a wind-mitigation inspection (typically $75 to $150), many Kings Point owners see windstorm-premium credits averaging around 25% on the windstorm portion of their policy. The exact numbers are set by the programs and your insurance carrier, so we can’t guarantee a specific credit, but we’ll document your window specs so you have what you need to apply.

One more comparison worth making here. Impact windows beat hurricane shutters in a retirement community like Kings Point for one simple reason: you never have to hang them. When a storm watch goes up, shutters mean a trip to the storage closet, a ladder, and bolt-down labor that many of our neighbors no longer want to do. Impact windows sit in the wall, do their job silently, and pass the condo board’s aesthetic rules year-round. If you’re replacing failed windows anyway, the incremental cost of impact glass beats buying and storing shutters.

Kings Point: Condo Approval Meets Florida Building Code

Here’s the local insight that no generic contractor gives you. Kings Point is one of Florida’s largest 55+ retirement communities, built almost entirely in the 1970s and 1980s as low-rise concrete block condominiums and villas. That means the window inventory is old: aluminum frames, single-pane glass, and jalousies that cannot be retrofitted to meet Palm Beach County’s current Florida Building Code impact-resistance mandates. When an owner wants to replace one, the work has to run through the Kings Point condo or HOA architectural review process, which enforces strict aesthetic uniformity. The board cares about frame color, frame material, and mullion configuration. If a contractor installs the wrong profile, the owner eats the refit or fights a violation. Our job is to make sure the window you pick passes board review the first time and meets code the same day. That’s the whole game in Kings Point.

Over in the Villas of Kings Point, off Kings Point Drive, our crew replaced a 1978 jalousie window in a screened lanai that the owner assumed could be grandfathered. The permit pull flagged it as non-compliant with current FBC HVHZ impact standards, and the owner was surprised to learn the jalousie had to go entirely. We worked through the Kings Point condo board to swap in a PGT 3-panel horizontal roller with Miami-Dade NOA approval and a laminated glass interlayer, then added low-E insulated glazing so the homeowner’s cooling load dropped noticeably by the next summer. That’s a typical Tuesday in Kings Point. The window gets replaced, the board is satisfied, and the cooling bill moves in the right direction.

Every replacement window we install in Kings Point carries a Florida Product Approval or Miami-Dade NOA number matched to the specific configuration and design pressure for that opening. We never exceed a rating of +/-100, and we never guess. The wind zone in this part of Palm Beach County is not theoretical; it’s the reason the code exists. Impact-rated. Energy-certified. Done right the first time, or we come back. That’s the Done Right Promise, and it’s on every window we install here.

We Also Serve Cities Near Kings Point

Our local crews serve Kings Point and the surrounding communities throughout Palm Beach and southern Broward counties. If you own a home in Kings Point or nearby, we’re the local team that answers. We also cover Delray Beach, Boynton Beach, Boca Raton, and Boca Del Mar with the same live 24/7 answer, the same upfront pricing, and the same condominium-association fluency. If you’re in one of those neighboring cities and need window installation, call the same number: (844) 901-4551. Dispatch and scheduling run from the brand’s Miami (South FL) office; crews serve Kings Point locally.

FAQs — Window Installation in Kings Point

Your Next Step in Kings Point

The first step is a free in-home measure. We’ll walk your villa or condominium with you, count the openings, check the frame condition, and give you a written, line-item quote with the exact impact-rated products that satisfy both the Kings Point board and Palm Beach County code. No vague estimates. No change orders. No surprises. Ed’s name is on the door, and on every job we do. Call (844) 901-4551 today to schedule your free estimate. A neighbor you can call at 2 a.m., and someone will actually answer. The one down the road.

Written by Ed Winslow, Owner at Winslow Windows & Doors, serving South Florida since 2011.