Free in-home measure and quote — PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterFast, Reliable Window Installation Across Dania Beach
Window installation in Dania Beach means something different than it does ten miles inland. You’re in Broward County’s High-Velocity Hurricane Zone, and every replacement unit has to meet Miami-Dade NOA standards before it can be legally set. Add the flight paths over western Dania Beach from Fort Lauderdale-Hollywood International Airport, and you’ve got a second spec most installers never think about: acoustic performance. We’ve been handling that combination since 2011. Call (844) 901-4551 and we’ll walk you through exactly what your home needs.
Key Takeaways:
- Every Dania Beach replacement window must carry a Miami-Dade Notice of Acceptance (NOA) or approved Florida Product Approval, no exceptions.
- Western Dania Beach homes under FLL flight paths need impact glazing plus meaningful STC acoustic ratings, a dual requirement most crews miss.
- Typical impact window installation in Dania Beach runs $800 to $1,500 per window; jalousie-to-impact conversions on older CBS homes cost more because the rough opening must be rebuilt.
- Free in-home measure and written line-item quote. Call (844) 901-4551.
Why Winslow Windows & Doors Is Dania Beach’s Preferred Window Installation Company
Ed Winslow’s name is on the door, and on every job we do in Dania Beach. We’re not a franchise operation handing your project to a subcontractor. We’re the same Window Installation team that has been rebuilding openings, setting NOA-rated units, and fixing other contractors’ mistakes across Broward County for over 15 years. When you call us about a jalousie conversion on a 1950s CBS home near Frost Park, the person who answers knows what a jalousie rough opening looks like and why it has to be rebuilt before any impact window goes in.
Our Dania Beach customers call us for two reasons most often. First, we document compliance properly. A Miami-Dade NOA is only as good as the installation behind it, and we photograph every step: rough opening correction, anchor spacing, flashing, sealant. That documentation is what your insurance carrier wants to see after a storm. Second, we don’t skip the acoustic layer on western Dania Beach homes. A window that stops wind but rattles every time a 737 climbs out of FLL isn’t a finished job. We spec the right interlayer for both wind load and sound transmission, because in Dania Beach you almost always need both.
Winslow Windows & Doors carries a published Broward County address and license number. Technicians are background-checked and uniformed before they set foot on your property. And if something isn’t done right, the Done Right Promise means we make it right. Period.
Our Window Installation Services in Dania Beach
We install every window type common to Dania Beach’s housing stock, from 1950s concrete block ranchers to newer townhome builds. Here are the four we do most often in the 33004 ZIP code and the streets around it.
Single & Double Hung Windows
Single hung and double hung units are the workhorse replacement window across Dania Beach’s older neighborhoods. On a CBS home off Stirling Road, we’re usually pulling out corroded aluminum originals and setting PGT WinGuard or CGI impact-rated single hungs. Double hungs cost a bit more but let you clean both sashes from inside and ventilate from the top, which matters when afternoon heat builds up in a one-story concrete block house with limited cross-breeze.
Casement Windows
Casement windows seal tighter than hung windows because the sash compresses against the frame when locked. That makes them a strong pick for Dania Beach homes that get driven rain off the Atlantic or sit close to Port Everglades with salt-heavy air. We install casements from CGI and ES Windows with marine-grade hardware so the crank mechanism and hinges don’t corrode after two seasons of salt spray.
Awning & Hopper Windows
Awning and hopper windows show up a lot in Dania Beach bathrooms, kitchens, and utility rooms, often as original jalousie replacements. Hinged at the top or bottom, they shed water well while still ventilating. For homes under the FLL approach path, we spec laminated glass in awning units too, because a small hopper window with single-pane glass can still transmit a surprising amount of jet noise at 6 a.m.
Horizontal Roller Windows
Horizontal roller windows are common in mid-century Dania Beach homes and in additions built during the 1960s and 1970s. The challenge with older rollers isn’t the glass, it’s the track system. Salt-laden air from the coast corrodes aluminum tracks fast, and the window stops rolling. We replace the entire unit with impact-rated rollers and make sure weep holes are sized and positioned to drain properly, not clog with salt residue.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Dania Beach
We’re an authorized installer for eight premium brands, and in Dania Beach we lean on the three that handle HVHZ wind loads and acoustic demands best: PGT, CGI, and ES Windows. PGT WinGuard is the most popular impact line for single-family homes here. CGI dominates the high-end custom and large-opening market, especially for bay and bow configurations. ES Windows gives us a strong aluminum option where homeowners want slim sightlines without giving up Miami-Dade compliance. We also install CWS and ECO Window Systems when a project calls for them. Because we stock fast-moving parts and hardware locally, we’re not waiting on a warehouse in another state when your Dania Beach install needs a missing anchor clip or replacement weep cover.
Common Window Installation Problems We See in Dania Beach Homes
- Jalousie windows that never got upgraded. Dania Beach is one of Broward’s oldest incorporated cities, and a large share of its core housing stock still has original louvered jalousie glass. Those units provide essentially zero wind or impact resistance. We convert them to NOA-rated impact windows, but almost always have to rebuild the rough opening first, because jalousie frames are not the same dimensions as modern impact units.
- NOA-rated frames set into non-square openings. A Miami-Dade Notice of Acceptance requires the unit to be installed per the manufacturer’s tested method. If the rough opening isn’t square and properly flashed, the NOA is void. We see this most often on 1950s CBS homes where slabs have settled and openings drift out of square by a half inch or more.
- Impact windows with no acoustic layer under the FLL flight path. Western Dania Beach sits directly under departure corridors. A standard impact window with a basic interlayer stops wind, but the homeowner still hears every full-throttle climb-out. We spec laminated interlayers with higher STC ratings for homes in flight path neighborhoods, including along SW 33rd Terrace and the streets running east from the airport boundary.
- Salt-corroded hardware on coastal-facing elevations. Homes east of Federal Highway and near the Dania Beach Marina get continuous salt spray. Standard aluminum sash hardware corrodes within a few seasons. We use marine-grade or PVC-encapsulated hardware and seal every frame penetration against driven salt, not just against rain.
Pricing for Window Installation in Dania Beach, FL
In Dania Beach, material cost is only one piece of the window installation price. A standard impact single hung runs roughly $900 to $1,800 installed. A casement or horizontal roller lands between $800 and $1,500 per window in a typical opening. The price moves up when we have to rebuild a jalousie rough opening, add acoustic interlayers for flight-path homes, or work with large custom openings like our Sliding Glass & Patio Doors in Dania Beach that can run $2,500 to $5,000. Whole-home packages across an average two-bedroom CBS house range from $8,000 to $25,000, depending on opening count, frame material, and wall thickness.
Call (844) 901-4551 for a free in-home measure. We’ll give you a written, line-item quote with the exact window models, ratings, and labor scope. No trip charge in our home county. No change orders snuck in after you sign.
What Window Installation Costs in Dania Beach
Here’s the honest math for the Dania Beach market, based on the homes we actually work on here, including the 1950s and 1960s CBS inventory that dominates the neighborhoods around Dania Pointe and west of US-1. These are installed prices, including labor, flashing, sealant, and debris removal.
Typical Installed Window Costs in Dania Beach
| Window Type | Dania Beach Installed Range | What Drives the Price Here |
|---|---|---|
| Impact single hung, standard opening | $900 to $1,800 | Frame material, glass package, acoustic interlayer if needed |
| Impact casement, standard opening | $800 to $1,500 | Hardware grade, marine coating for east-facing homes |
| Jalousie-to-impact conversion (rebuild opening) | $1,800 to $3,200 | Rough opening rebuild, new buck frame, structural fastening |
| Large or custom impact unit (bay, bow, 3-panel slider) | $2,500 to $5,000+ | Opening size, load calculations, lift equipment |
| Whole-home replacement package | $8,000 to $25,000+ | Window count, mix of types, second-floor access |
Two factors push Dania Beach pricing above neighboring inland cities. First, every unit has to meet HVHZ requirements, which means impact-rated glass packages and NOA-compliant installation. Second, homes under the FLL approach path need acoustic interlayers that most Hollywood or Fort Lauderdale quotes don’t include. A cheap quote that skips that layer isn’t cheaper, it’s incomplete.
The free in-home measure and written quote are how you compare real numbers. Call (844) 901-4551 and we’ll schedule it around your day, not ours.
Florida Pays You Back
Window replacement in Dania Beach qualifies for several programs that can take real money off your final cost. The My Safe Florida Home program offers matching grants up to $10,000 for qualifying wind-mitigation upgrades, which includes impact windows meeting HVHZ standards. Florida also has a sales-tax exemption on impact-resistant windows and doors, and the federal 25C energy credit covers 30% of product cost up to $600 per year on qualifying Energy-Efficient Windows — Dania Beach units. After installation, a wind-mitigation inspection typically costs $75 to $150 and can earn you a premium credit on the windstorm portion of your policy, often around 25%. Final numbers come from the programs and your carrier, but the documentation we provide at the end of your install is exactly what those parties ask for.
One comparison worth making in Dania Beach: permanent impact windows versus hurricane shutters. Shutters are cheaper up front. But they do nothing for energy efficiency, nothing for jet noise, and you have to install them before every storm. Impact windows protect 24/7, reduce FLL noise, cut cooling bills, and you never have to drag panels out of a garage at the last minute. For most Dania Beach homeowners, impact windows are the better long-term investment, and the incentive stack makes the gap smaller than most people expect.
We Also Serve Cities Near Dania Beach
Our crews work throughout this corner of Broward County, so if you’re in West Hollywood, Melrose Park, Hallandale Beach, or Pembroke Park, the same Window Installation in Dania Beach team is a short drive away. We understand the same HVHZ requirements apply across these cities, and we quote them the same honest way. Call (844) 901-4551 and tell us where you are.
Serving Dania Beach, FL — Our Local Coverage Area
We’re based in the Dania Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Window Installation in Dania Beach
Yes, in most cases. Every replacement window in Dania Beach must carry a Miami-Dade NOA or approved Florida Product Approval because the city sits inside the High-Velocity Hurricane Zone. There is no separate legal acoustic rating requirement. But if you live in western Dania Beach under an FLL departure or approach corridor, you’ll want an STC rating specified, too. A standard impact window with a basic interlayer stops wind but won’t meaningfully reduce jet noise. We commonly pair NOA-rated frames with a laminated interlayer rated for both impact and sound. Call (844) 901-4551 to find out which interlayer your street needs.
Because the original windows were almost certainly jalousie louvered units, and a jalousie opening is not dimensionally compatible with a modern impact window frame. The original louvered frame is shorter and narrower in profile than an NOA-rated unit’s required anchor surface. If you set an impact window into that opening without rebuilding the rough opening, the Miami-Dade NOA is technically void and the unit can fail wind mitigation inspection. We rebuild the opening, square it, flash it, and then set the window the way the manufacturer’s tested method requires. It costs more in labor, which is exactly why cheap quotes from crews that don’t know Dania Beach’s housing stock skip it. Call (844) 901-4551 for a quote that includes every step on paper.
For most Dania Beach homes, yes. Low-E coatings cut solar heat gain, which matters on a concrete block house that soaks up sun all afternoon. The east-west orientation of many Dania Beach streets, especially north of Stirling Road, means afternoon sun hits windows directly for hours. Low-E impact glass reduces that heat load and cuts cooling costs. The premium is modest, usually a few hundred dollars per window, and it pays back both in comfort and in the federal 25C energy credit. South-facing windows benefit most. Call (844) 901-4551 and we’ll tell you honestly which elevations on your house justify the Low-E upgrade.
Window replacement in Dania Beach requires a Broward County permit, and the sequence works like this. We document the existing openings and product approvals, pull the permit, and the work proceeds. After installation, the county sends an inspector to verify the windows meet the approved plans, including the NOA product approval and the installation method. We’re present for every inspection. Once it passes, you have a completed permit record. That record is what your insurance carrier wants to see when you apply for windstorm premium credits. We handle the entire sequence and include permit fees in your line-item quote. Call (844) 901-4551 if you want to see how the numbers break down for your house.
You can use any brand that carries a valid Miami-Dade NOA or Florida Product Approval for your specific window configuration and size. That’s the key phrase: “for your specific configuration.” A brand can have approvals for some product lines but not others, and a given NOA number applies only to specific frame materials, glass packages, and opening dimensions. We install from eight approved brands including PGT, CGI, ES Windows, CWS, and ECO Window Systems, and we verify the exact NOA number for your window before it’s ordered. Never accept a quote that says “impact rated” without listing the actual product approval number. Call (844) 901-4551 and we’ll pull the approvals for your home while you’re on the phone.
Winslow Windows & Doors is the one down the road. Window Installation in Dania Beach is a job that demands local knowledge of HVHZ code, FLL flight-path acoustics, and 70-year-old concrete block construction. We have all three. Call (844) 901-4551 for your free estimate today.
Written by Ed Winslow, Owner at Winslow Windows & Doors, providing our Door Installation in Dania Beach and impact-rated replacements throughout Dania Beach and Broward County since 2011.