Free in-home measure and quote — PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterFast, Reliable Shingle, Tile & Metal Roofing Across Andover
Shingle, tile, and metal roofing in Andover comes down to one thing most homeowners don’t realize until it’s too late: this neighborhood sits close enough to the Atlantic that salt air chews through standard roofing hardware years before the roof itself looks tired. We see it on 1960s CBS ranches all over the 33023, and it changes what we specify, what we fasten, and what we flash. Ed Winslow founded Winslow Windows & Doors in 2011, and our Shingle, Tile & Metal Roofing crews work Andover regularly. If you’re looking at a roof that’s lifting at the edges, showing rust blooming at the drip edge, or just past its useful life, call (844) 901-4551. We’ll send someone who knows exactly what Andover’s salt air does to a roof.
Why Winslow Windows & Doors Is Andover’s Preferred Shingle, Tile & Metal Roofing Company
We’re not a faceless national chain that routes re-roof calls into a call center three states away. When you call about a lift in your shingles near SW 24th Street or a rusted valley metal on a ranch off Ives Dairy Road, a live person answers. Every time. Day or night. That matters when a Broward County thunderstorm has just pulled shingles off your ridge and rain is coming through the ceiling.
Our technicians arrive in uniform and background-checked, so the person at your door in Andover is the same person Ed Winslow’s accountability covers. We publish our address and license number. Ed’s name is on the door, and on every roof we replace or repair. For more than 15 years, homeowners across South Florida have hired us for one reason: we do what we say we’re going to do, and the Done Right Promise means if it isn’t done right, we come back and make it right. No fine print. No expiration.
Andover homeowners also get our standing offers, permanently: $40 off any repair over $200, a free second opinion on any written estimate, and a 10% discount for seniors and veterans. If another company quoted you a roof and you want a straight answer on whether that quote covers coastal-spec hardware, bring it to us.
Our Shingle, Tile & Metal Roofing Services in Andover
Our Shingle, Tile & Metal Roofing in Andover service covers everything from a single rusted flashing replacement to a full tear-off and re-roof, but most of the work we do here falls into four categories.
Shingle Roofing: Full Replacement with HVHZ-Rated Underlayment and Stainless Hardware
Most shingle roofs in Andover are original 3-tab asphalt from the 1960s and 70s, nailed with galvanized fasteners that lost their zinc coating to salt air years ago. By the time a homeowner sees lifting tabs or granule loss in the gutter, the fasteners underneath are often already corroded. A repair that just swaps shingles can’t fix what’s rusting beneath. We do full tear-offs with an HVHZ-rated self-adhered underlayment, hot-dip galvanized ring-shank nails, and stainless steel flashing at every penetration. That’s the coastal-spec version, and in Andover it’s the only version that survives.
Metal Roofing: Corrosion-Resistant Fastener and Flashing Upgrades
Metal panel systems perform beautifully in South Florida, if the hardware matches the environment. Andover’s 6–8 mile inland location still puts enough salt in the air to pit standard fasteners and flashings within a decade. We specify hot-dip galvanized ring-shank fasteners, stainless steel flashings at chimneys and vents, and high-temp silicone on every lapped seam. The result is a roof that doesn’t just look good for five years; it’s mechanically intact for decades.
Tile Roofing: Clip Replacement and Underlayment Re-Roofs
Concrete barrel tile is common on Andover’s slightly newer homes, and it’s a strong roof until it isn’t. We regularly see zinc-plated tile clips corroded and snapped near the eave line, which is exactly where wind uplift peaks during a Broward thunderstorm. What looks fine from the ground can be unanchored above the fascia. We inspect, re-clip with stainless hardware, and when the underlayment is done, we re-roof the tile bed properly. If your insurance carrier flagged your tile roof as not wind-mitigated, this is usually why.
Roof Repair: Fastener, Flashing, and Leak Repairs
Not every Andover roof needs a full replacement. We do targeted repairs on rusted drip edge, pitted valley metal, failed pipe boots, and lifted shingle tabs. But we won’t patch a roof that’s mechanically exhausted and call it a repair, because that false economy is how Andover homeowners end up re-roofing twice in ten years. When we recommend a repair, it’s a repair. When we recommend replacement, we’ll show you exactly why, with photos.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Andover
Winslow Windows & Doors is an authorized installer for PGT, CGI, and CWS, and that matters as much on roofing jobs as it does on windows. When a roof replacement ties into an Window Installation — Andover or door opening, we’re already working inside the same brand ecosystem the homeowner trusts. We’d rather install premium products we can stand behind for decades than whatever is cheapest at the supply house. For Andover homeowners, that means a roof and opening protection system that work together under HVHZ design pressures, not a patchwork of mismatched parts.
Common Shingle, Tile & Metal Roofing Problems We See in Andover Homes
- Rusted-through galvanized roofing nails. On original 1950s–70s shingle roofs across the 33023, the zinc coating on roofing nails fails in 8–12 years from salt-laden air. Shingles lift and blow off in wind events they were never re-rated for under HVHZ pressures.
- Pitting and pinhole corrosion on aluminum drip edge and valley metal. Where salt-laden condensation lingers, aluminum develops white pitting that lets water wick into the fascia and soffit long before the shingles themselves fail. We find this on nearly every 1960s CBS ranch we strip off SW 24th Street.
- Snapped tile clips near the eaves. Concrete barrel tile installed with standard zinc-plated clips loses clip integrity at the eave line, where wind uplift peaks. Tiles look anchored from the ground but aren’t.
- Metal roof retrofits trapping humid air over weathered felt. We see metal roofs installed over the original wood deck without replacing the felt underlayment underneath. Salt-damp air gets trapped between the metal and the deck, accelerating deck rot inside what looks like a sealed assembly.
Pricing for Shingle, Tile & Metal Roofing in Andover, FL
A full shingle tear-off and replacement on a typical Andover CBS ranch runs $18,000 to $32,000 depending on square footage, roof pitch, and how much rotted decking needs replacing. Metal panel roofs in Andover generally land between $25,000 and $45,000 for a full replacement with coastal-spec fasteners and stainless flashing. Tile re-roofs with new underlayment and stainless clips run $30,000 to $55,000. The coastal-spec hardware adds roughly 10–15% to material cost versus a standard inland spec, and it’s the cheapest insurance you’ll ever buy. Cheap inland spec on a 1960s ranch means you’re re-roofing again inside ten years. We’ll give you a written, line-item quote before any work starts, no change orders, no surprises. Call (844) 901-4551 to schedule your free estimate.
What Shingle, Tile & Metal Roofing Costs in Andover
Andover roofing prices don’t move as much as people think when you compare across Broward County. What moves the number here is hardware specification. A shingle roof on a modest 1,400-square-foot ranch, done with standard galvanized fasteners and basic flashing, might quote out around $16,000 to $20,000. The same roof done with hot-dip galvanized ring-shank nails, stainless flashings, and an HVHZ-rated underlayment runs maybe $2,000 to $4,000 more. That gap is real and it’s the difference between a roof that lasts 20-plus years and one that starts failing in eight.
Opening count matters too. If you’re replacing skylights, pipe boots, vents, or tying into impact-rated openings, every penetration changes the price. Floor height and roof pitch affect labor. A steep-pitched ranch roof on a 1960s CBS home costs more in labor than a low-slope section. We’ll measure everything in person and give you a written line-item quote. Free. No trip charge inside our home county. Call (844) 901-4551.
Florida Pays You Back
The state of Florida has put real money behind wind-mitigation upgrades, and Andover homeowners can stack several programs. The My Safe Florida Home program offers matching grants up to $10,000 for qualifying wind-mitigation improvements, which includes roof replacement with HVHZ-rated materials. Florida also exempts impact-resistant windows and doors from sales tax. On the federal side, the 25C energy credit covers 30% of product cost, up to $600 per year, on qualifying units. And once your roof is done, a wind-mitigation inspection ($75–$150) can document the upgrades for your carrier; homeowners commonly see windstorm-premium credits averaging around 25% on the windstorm portion of the premium. We won’t promise a specific dollar figure from your insurer, because carriers set their own underwriting, but the documentation path is straightforward. A coastal-spec re-roof in Andover is often the single most effective line item for getting a non-renewal notice reversed.
We Also Serve Cities Near Andover
Our crews regularly work Miramar, West Park, Hollywood, and West Hollywood as well, so if you’re just outside the 33023 or know someone in a neighboring town dealing with a roof question, we’re likely already familiar with the street. Winslow Windows & Doors is Andover‘s local roofing team, and we treat every job like Ed’s name is on it, because it is.
Serving Andover, FL — Our Local Coverage Area
We’re based in the Andover area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Shingle, Tile & Metal Roofing in Andover
Andover sits 6–8 miles inland, but salt-laden Atlantic air reaches this far without much trouble. Standard galvanized fasteners lose their zinc coating to that salt air within 8–12 years, and once the zinc is gone, the steel underneath rusts through. A metal roof in Andover needs hot-dip galvanized or stainless fasteners because the corrosion clock starts the day it’s installed. The inland spec doesn’t fail because the metal panels fail; it fails because the hardware holding the panels rots out. Call (844) 901-4551 and we’ll show you the difference on a written quote.
It depends on the condition of the underlayment and the fasteners underneath, but on most 1960s CBS ranches in Andover, the fasteners are already corroded and the original felt underlayment is past its useful life. Patching shingles onto a deck whose nails are rusting through doesn’t restore wind resistance. A full tear-off with an HVHZ-rated underlayment and stainless hardware is the only way to get a Miami-Dade NOA for the new roof assembly. We’ll do a free inspection and show you exactly what’s under the shingles before you spend a dime. Call (844) 901-4551.
What’s going on is usually the clips. Concrete barrel tile on older Andover homes was frequently installed with zinc-plated clips that corrode and snap near the eave line, where wind uplift peaks. From the ground, the tiles look perfectly fine because they’re still resting in place. From an inspector’s standpoint, unanchored tiles mean the roof can’t be verified against HVHZ design pressures. We re-clip with stainless hardware and replace the underlayment if needed, then document the work for your wind-mitigation inspection. Call (844) 901-4551 for a free roof evaluation.
On a typical Andover ranch, the coastal-spec version runs about 10–15% more in materials. For a $20,000 roof, that’s roughly $2,000 to $4,000. The inland spec saves you that money upfront and costs you a full re-roof within a decade when the fasteners rust through. That’s not a hypothetical; we’ve stripped Andover roofs where the galvanized nails snapped off in our hands. The coastal-spec hardware is the cheaper roof over any honest timeframe. Call (844) 901-4551 for a written line-item quote on your exact roof.
Not necessarily, but the roof and the openings need to work together under HVHZ design pressures. If your shingle roof is at the end of its life and the fasteners are corroded, a re-roof first makes sense because the new impact windows will be anchored into real structural framing with a fresh water-shedding assembly above them. If the roof has life left, we can do the Window Replacement in Andover independently. Either way, we’ll stage the work so you’re not tearing things apart twice. Call (844) 901-4551 and we’ll walk the property with you.
Contact Winslow Windows & Doors for Shingle, Tile & Metal Roofing in Andover
The salt air six miles inland doesn’t care what the cheap inland spec looks like when it’s new. It’s working on the fasteners from day one. If you own a 1950s–70s CBS ranch in the 33023, the question isn’t whether salt is attacking your roof; it’s how far along the damage is. We’ll tell you straight. Free estimate, written line-item quote, no trip charge inside our home county, and Ed Winslow’s word standing behind every fastener we drive. Call (844) 901-4551 today. We’re the one down the road.
Written by Ed Winslow, Owner at Winslow Windows & Doors, providing Shingle, Tile & Metal Roofing in Andover, FL.