Free in-home measure and quote — PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterFast, Reliable Energy-Efficient Windows Across Lighthouse Point
Energy-efficient window installation in Lighthouse Point typically runs $800–$1,500 per window for impact-rated units, with whole-home packages landing between $8,000 and $25,000+ depending on opening count and frame material. If you’re replacing original jalousies or corroded single-pane aluminum, the job is usually done in a single day once your custom units arrive. Call (844) 901-4551 for a free in-home measure, and we’ll give you a written line-item quote before anything gets ordered.
We know Lighthouse Point’s canal-front homes the way only a local crew can. Salt air off the Intracoastal eats standard window hardware faster than almost anywhere in Broward County, and every permitted replacement has to clear Miami-Dade NOA review. Those two facts shape every estimate we write here.
Key Takeaways:
- Every replacement window in Lighthouse Point must carry a Miami-Dade or Broward Notice of Acceptance (NOA) because the city sits fully inside the High Velocity Hurricane Zone.
- Marine-grade anodized or painted aluminum frames and stainless hardware are the baseline on canal-front lots, not an upsell.
- Impact energy-efficient windows run $800–$1,500 per opening installed; whole-home projects range $8,000–$25,000+.
- Winslow installs PGT, CGI, CWS, and ES Windows systems, all of which carry NOA-listed configurations for Lighthouse Point’s wind zone.
- Ed Winslow owns this business. His name is on the door and on every job we do.
Why Winslow Windows & Doors Is Lighthouse Point’s Preferred Energy-Efficient Windows Company
We’ve been installing windows and doors in South Florida since 2011, and we’ve pulled enough original jalousies out of Lighthouse Point ranch homes to know exactly what waits behind them: pitted tracks, seized hardware, and frames leaking conditioned air into the salt breeze. Homeowners here don’t need a sales pitch about energy efficiency. They need a crew that specs the right glass package and the right corrosion-resistant frame for a house sitting ten feet from a finger canal.
Every technician who arrives at your Lighthouse Point home is background-checked and in uniform. You’ll know who’s at your door before the truck pulls up. That matters on a street where neighbors talk, and where a sloppy install on one canal-front home becomes the subject of a dock conversation by Saturday.
Ed Winslow owns Winslow Windows & Doors, and our license number and address are published. No shell companies, no ticket numbers, no call centers. The Energy-Efficient Windows team working in Lighthouse Point answers to the owner, not a regional manager three states away. And when you call us, a live person picks up, 24 hours a day.
Our Energy-Efficient Windows Services in Lighthouse Point
Low-E & Argon Gas Glass
Low-E coatings paired with argon gas between the panes are the workhorse of energy savings in Lighthouse Point. The coating reflects infrared heat back out while argon slows thermal transfer, which is exactly what a west-facing canal wall needs on an August afternoon. Homeowners here regularly see measurable cooling-cost drops after replacing single-pane units with Low-E insulated glass, and the glass package costs nowhere near what the long-term savings add up to.
ENERGY STAR Replacement Windows
ENERGY STAR certified windows for South Florida carry a U-factor and Solar Heat Gain Coefficient tuned for cooling-dominant climates, not the heating numbers stamped on a northern window. In Lighthouse Point, that means a low SHGC on the water-facing elevations. We specify ENERGY STAR units from PGT, CGI, and CWS that also carry the Miami-Dade NOA ratings your permit package requires.
Insulated Laminated Glass
Laminated glass matters for two reasons on Lighthouse Point canal homes. First, it holds together when impacted rather than shattering into the room. Second, the interlayer cuts noise transfer from Intracoastal traffic and boat activity, and it adds a UV-filtration layer that protects interior finishes. For bedrooms facing the water, laminated insulated units are the standard we recommend.
UV-Blocking & Fade Protection
Salt air isn’t the only thing working against a Lighthouse Point home. Direct South Florida sun through original single-pane glass bleaches hardwood floors, fades upholstery, and heats rooms well past what the AC can comfortably beat back. UV-blocking coatings on Low-E glass cut fade-causing rays substantially while keeping visible light where you want it. The difference on a canal-front living room with an eastern exposure is noticeable within the first season.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lighthouse Point
Winslow Windows & Doors is an authorized installer for eight premium brands, and for Lighthouse Point work we lean hardest on PGT, CGI, CWS, and ES Windows. These manufacturers publish Miami-Dade NOA product listings for the exact wind pressure ratings a canal-front home in the 33064 zip code requires, and their aluminum frame finishes are built to survive marine exposure. We don’t swap in a big-box line to win a job on price, because that unit fails NOA review in Lighthouse Point and we’d be back pulling it out in five years. We stock common hardware and glass packages for these brands, which shortens lead times on replacements and warranty work.
Common Energy-Efficient Windows Problems We See in Lighthouse Point Homes
- Pitted and seized sashes on canal-front lots. Original aluminum frames here corrode fast. We regularly pull sashes from Lighthouse Point canal homes where the track has pitted so badly the window won’t seat, and the only fix is full replacement.
- Impact glass that never carried a Broward NOA. A Florida Product Approval alone doesn’t pass a Lighthouse Point building inspection. We see this after less careful installs, and it voids the wind mitigation discount.
- Double-hung locks that seize from salt air. Standard steel hardware corrodes within a few seasons on the water. Marine-grade stainless locks and balances are what keep a double-hung operable here.
- Failed seals from thermal cycling. Non-thermal-break aluminum frames sweat and eventually lose seal integrity in this humidity. That foggy glass means the insulating gas is gone and the unit is doing nothing for you.
Pricing for Energy-Efficient Windows in Lighthouse Point, FL
Impact-rated energy-efficient windows in Lighthouse Point run $800–$1,500 per opening installed for standard sizes. Single-hung impact units land between $900 and $1,800. Large or custom openings, like a multi-panel sliding door or a wide canal-facing picture window, run $2,500–$5,000. Whole-home packages across a 1,800 to 2,400 square foot mid-century CBS ranch typically land between $8,000 and $25,000+, with the spread driven by opening count, frame material, and any structural work the existing buck frames require.
What moves the number in Lighthouse Point specifically is the frame spec. Marine-grade anodized or painted aluminum with stainless hardware costs more than standard, but it’s the only thing that survives this salt air without pitting inside a decade. A cheap quote that leaves out the NOA documentation or uses standard hardware will fail inspection or corrode out. Our quote includes it from the start.
What Energy-Efficient Windows Costs in Lighthouse Point
Let’s put real numbers on it. For a standard 36″ x 60″ impact single-hung with Low-E insulated glass and a Miami-Dade NOA-listed frame, Lighthouse Point homeowners should expect $900–$1,800 per unit installed. A canal-facing fixed picture window with laminated insulated glass runs higher due to the larger glass area and higher design pressure requirements. Whole-home packages for the typical three-bedroom Cape Coral-style ranch here start around $8,000 and climb with window count and opening width.
What changes the quote: opening count, floor height above grade (upper floors can require higher design pressure ratings), frame material, and whether the existing rough openings need reframing after decades of salt exposure. We measure every opening, check existing flashing, and give you a written line-item price before ordering anything. Call (844) 901-4551 for a free in-home measure in Lighthouse Point.
Florida Pays You Back
The incentives stack if you plan the job right. My Safe Florida Home offers matching grants up to $10,000 for qualifying wind-mitigation upgrades, and energy-efficient impact windows can qualify. Florida exempts impact-resistant windows and doors from sales tax. The federal 25C energy credit returns 30% of product cost on qualifying units, up to $600 per year. And after a wind-mitigation inspection ($75–$150), most Lighthouse Point homeowners see windstorm-premium credits averaging around 25% on the windstorm portion of their policy. Programs and carriers set the final numbers, so we’ll point you to the paperwork and let your insurer confirm the exact credit.
One comparison worth making: impact windows versus hurricane shutters. Shutters sit in a garage until a storm approaches, then someone has to haul panels across the yard and bolt them onto the house. Impact windows are permanent protection, always in place, and they work every single day as your energy and UV barrier. In Lighthouse Point, where the next big storm doesn’t check your calendar, permanent protection is the smarter money.
Every unit we install in Lighthouse Point carries a Miami-Dade or Broward NOA number printed on the product listing, design pressures matched to the opening (never above +/-100 without engineering review), and HVHZ compliance where the wind zone requires it. That documentation is what gets your inspection passed and your wind mitigation discount applied.
We Also Serve Cities Near Lighthouse Point
Winslow Windows & Doors serves all of Lighthouse Point plus the surrounding communities of Pompano Beach Highlands, Deerfield Beach, Pompano Beach, and Coconut Creek. The same marine-corrosion standards and NOA requirements apply across the water-facing parts of these cities, and our crews carry the same PGT, CGI, and CWS product knowledge into each one.
Serving Lighthouse Point, FL — Our Local Coverage Area
We’re based in the Lighthouse Point area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Energy-Efficient Windows in Lighthouse Point
Lighthouse Point sits entirely inside Florida’s High Velocity Hurricane Zone, so the city enforces the strictest impact-product standard in the state. A window with only a Florida Product Approval does not meet the local building code requirement and will fail inspection on a permitted replacement. The NOA documents the exact wind pressure the assembly withstands for your specific opening. Call (844) 901-4551 and we’ll show you the NOA listing for every unit we quote.
A compliant quote includes marine-grade anodized or painted aluminum frames, stainless hardware, Miami-Dade or Broward NOA documentation for every opening, proper flashing at the rough opening, and design pressures matched to the home’s exposure on the water. Cheap estimates strip the frame finish, use standard steel hardware, and slide in units that carry only a Florida Product Approval. Those jobs fail inspection or corrode within five to seven years on canal-front lots.
Replacing original jalousies with impact-rated Low-E units typically moves the home into wind-mitigation credit territory, and most Lighthouse Point homeowners see a meaningful reduction in the windstorm portion of their premium. The inspector confirms the NOA documentation and design pressure ratings match each opening. On a recent canal-front ranch in the 33064 zip code, our crew pulled original jalousies that had pitted so badly the sashes wouldn’t seat, installed PGT impact casements with marine-grade anodized frames and Low-E insulated glass, and the wind mitigation inspection passed on the first visit because every jamb and sash met the required design pressure. The homeowner later saw a 27% drop in monthly cooling cost.
Yes, and in most cases it should be. PGT, CGI, and CWS all publish NOA-listed configurations that pair impact glazing with Low-E coatings and argon gas fill, so a single window does both jobs: it meets the HVHZ impact standard and cuts solar heat gain on canal-facing elevations. This is our standard spec for Lighthouse Point canal homes, not a special order.
Homeowners replacing original single-pane jalousies across a full Lighthouse Point home commonly report cooling-cost reductions in the 20–30% range, with west-facing and canal-front homes on the higher end. The combination of Low-E coatings, argon gas fill, and airtight installation stops the conditioned air loss and solar heat gain that jalousies were never designed to control. Call (844) 901-4551 for an exact quote, and we’ll walk you through what your specific floor plan should save.
Winslow Windows & Doors is the one down the road. Ed’s name is on the door, and on every job we do in Lighthouse Point. Call (844) 901-4551 for a free estimate, a free second opinion on any written quote, or just to talk through what your home actually needs.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Lighthouse Point and South Florida since 2011.