Free in-home measure and quote — PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Sunrise
Door installation in Sunrise costs anywhere from $1,200 for a basic entry door up to $7,500 for a custom hurricane-rated front entry with sidelights. Every single door we install in Sunrise must meet Broward County’s High Velocity Hurricane Zone code, so there’s no such thing as a “quick, cheap” door swap here. Our crews work in Sunrise neighborhoods weekly, and we know exactly what the local inspectors look for before we ever touch a rough opening. Call (844) 901-4551 and we’ll give you a straight answer on your door, your opening, and your permit situation.
Why Winslow Windows & Doors Is Sunrise’s Preferred Door Installation Company
Ed Winslow put his name on this company in 2011, and that’s the standard every Sunrise job gets held to. When a Sunrise homeowner calls about a rotted jamb on a 1972 CBS home off Nob Hill Road or a jalousie door that leaks air in the Springtree corridor, we know the house type before the tech pulls up. Background-checked, uniformed technicians. Live person on the phone at 3 a.m. when a storm is bearing down. A published address and license number, not a PO box and a burner phone.
Local reputation matters more here than in most South Florida cities because word travels fast through Sunrise’s HOA boards and neighborhood groups. Our work in Inverrary, Springtree, and the blocks around Sawgrass Mills shows up in conversations at the community centers and condo association meetings. We’re the Door Installation crew your neighbor already used. And we’re accountable for every opening we touch because our office isn’t six states away.
Our Door Installation Services in Sunrise
Entry Doors
A front door does two jobs in Sunrise that a front door in, say, Atlanta doesn’t: it’s your primary defense against wind-driven rain and flying debris, and it’s the first thing an insurance adjuster looks at after a named storm. We install Therma-Tru and PGT entry doors sized and anchored to the HVHZ requirements for your specific opening. Most Sunrise entry door replacements are on 1960s to 1980s CBS homes where the original jamb has degraded from decades of humidity, which means the rough-buck gets rebuilt before the new door ever goes in. Call (844) 901-4551 for a free in-home measure on your entry door.
Hurricane-Proof Front & Entry Doors
Sunrise sits entirely inside Broward’s HVHZ, so hurricane-proofing isn’t an upsell here. It’s the law. A Miami-Dade NOA-certified impact door is the only door that can legally go into a Sunrise opening, and that’s true whether you’re replacing one door or ten. We’re an authorized installer for PGT and CGI, two of the brands whose NOAs most commonly match Sunrise’s 1960s-1980s concrete block rough openings without major structural surgery. Our techs pre-drill anchor holes to the exact spacing stated on the product’s NOA before any Broward inspector arrives.
French & Double Doors
French doors look right on a Sunrise ranch home’s lanai or a Springtree condo’s balcony opening, but they’re also two moving leaves that both have to be impact-rated to large-missile standards. That means both doors, the astragal between them, and the header hardware all carry Florida Product Approval numbers. We install double-door configurations with PGT impact glazing and reinforced framing that passes Sunrise’s HVHZ inspection the first time. Screened lanais in older Sunrise homes often need a rough-opening evaluation before we quote, because the original jamb depth rarely matches modern NOA specifications.
Replacement Doors
Most replacement door work in Sunrise is driven by one of three things: a failed safety inspection, a wind-mitigation report that’s about to expire, or a jamb that’s rotted through from decades of Broward humidity. We remove the old unit down to the rough buck, correct any water damage, and set the new door to the NOA’s exact depth and anchor pattern. Every replacement door we install in Sunrise gets a documented Florida Product Approval number tied to your address, which is what your wind mitigation inspector checks before crediting your premium discount.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Sunrise
Winslow is an authorized installer for PGT, CGI, and CWS, which means our crews carry the factory training and the right fasteners for each product line. That’s not a small detail in Sunrise, where a PGT unit anchored with CGI spacing gets red-tagged by the Broward inspector. We stock common jamb sizes and hardware for Sunrise’s older CBS homes so a single-door replacement doesn’t sit waiting on parts out of a warehouse in Texas. If your HOA or insurance company asks for a product approval number, we hand it to you with the quote, not after you’ve asked three times.
Common Door Installation Problems We See in Sunrise Homes
- Rotted jambs on original 1970s CBS homes. Four decades of near-100% humidity plus the occasional storm surge of moist air off the Everglades eats the wood around old aluminum doors. The door itself might be fine; the structure holding it often isn’t.
- Non-impact doors installed by out-of-area crews. A handyman might slap a pretty door in and call it done, but without a Miami-Dade NOA, that door is illegal in Sunrise and useless for wind mitigation claims. Inspectors red-tag these on sight.
- Anchor spacing that doesn’t match the NOA. This is the most common inspection failure we see. Crews trained in non-HVHZ counties like Coral Springs or Parkland use generic spacing, and the Sunrise inspector rejects the rough opening. Re-drilling after the fact is messy and expensive.
- Jalousie doors on lanais and side entrances. Those original crank-out glass slats are not shutter-exempt, not impact-rated, and not repairable to modern code. In Sunrise’s HVHZ, they get replaced wholesale, and the opening usually needs to be reframed to accept a real impact door.
Pricing for Door Installation in Sunrise, FL
A standard single entry door replacement in Sunrise typically runs $1,200 to $2,800, depending on the product and whether we’re rebuilding the rough opening. Impact-rated hurricane entry doors with a Miami-Dade NOA start around $2,500 and land between $3,500 and $7,500 for named-brand units with sidelights or custom sizing. French and double door setups in Sunrise run $4,000 to $9,000 installed, with the higher end covering full rough-buck rebuilds and multi-point locking hardware. The biggest cost drivers here are opening count, wind-zone load requirements stamped on the NOA, and whether your existing jamb meets the NOA’s stated rough-buck depth. Contact us at (844) 901-4551 to schedule a free in-home measure and written quote.
What Door Installation Costs in Sunrise
Impact windows in Sunrise’s market generally run $800 to $1,500 per window installed, and a single impact entry door lands in the same range as a mid-size window upgrade: $2,500 to $5,000 for most PGT or CGI configurations. Custom or oversized front entry doors with sidelights can hit $7,500. Whole-home packages, where you’re replacing every opening on a 1970s Sunrise CBS ranch, typically land between $8,000 and $25,000 or more depending on the number of openings and product selection. What moves the price in Sunrise specifically: HVHZ wind-load requirements on every single opening, the age of your rough buck and whether it needs rebuilding, and the floor height of your condo unit, which changes design pressure ratings. We give you a free in-home measure and a written, line-by-line quote before you commit to anything.
Florida Pays You Back
If you’re replacing doors and windows in Sunrise, there are real dollar programs on the table right now. My Safe Florida Home offers matching grants up to $10,000 for qualifying wind-mitigation upgrades. Florida exempts impact-resistant windows and doors from sales tax. The federal 25C energy credit can return up to $600 per year on qualifying units, calculated on 30% of product cost. And after a wind-mitigation inspection, which runs $75 to $150, most homeowners see their windstorm premium drop somewhere in the neighborhood of 25% on the windstorm portion of the policy. Programs change, and carriers set final numbers, so we’ll point you to the right paperwork and let your inspector confirm the exact figure.
We Also Serve Cities Near Sunrise
Our crews work Sunrise every week, and we regularly send the same trained, background-checked technicians up to Wilton Manors, North Andrews Gardens, Oakland Park, and Lauderdale-by-the-Sea. Door Installation in Sunrise is our home market, but if you’re a few minutes up the road, call (844) 901-4551 and we’ll schedule the same free in-home measure.
Serving Sunrise, FL — Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Door Installation in Sunrise
Yes. Sunrise is entirely inside Broward County’s High Velocity Hurricane Zone, so every door opening, including a single entry door, must use a Miami-Dade NOA-certified impact product installed to HVHZ protocols. There’s no exception for “just one door.” Call (844) 901-4551 and we’ll verify what your specific opening needs.
Sunrise inspectors verify that the rough-buck depth and anchor spacing match the exact conditions stated in the product’s Miami-Dade NOA. In non-HVHZ Broward cities, installers use generic spacing and still pass. Here, a deviation of even half an inch gets the rough opening red-tagged. We pre-drill to the NOA’s stated pattern before the inspector sets foot on site.
Most likely, yes. The windstorm portion of a Sunrise policy gets credited after a wind-mitigation inspection documents every opening. A Miami-Dade NOA door with the right Florida Product Approval number on record is one of the biggest single opening-level credits available. The inspection itself runs $75 to $150, and the premium reduction, on average, lands around 25% on the windstorm portion. Your carrier sets the exact number.
Sunrise’s housing stock was mostly built between the late 1960s and mid-1980s, and the original aluminum-frame, single-pane doors and jalousie units on those homes are now 40 to 60 years old. Humidity, UV, and salt air carried inland from the Intracoastal have corroded frames and failed glazing seals. More importantly, those original doors are flatly non-compliant with current HVHZ wind-load code, so they can’t stay in place indefinitely.
Yes, and this catches a lot of people off guard. Mid-rise condos in the Inverrary and Springtree corridors often have architectural review boards that need your product’s Florida Product Approval number before they’ll sign off on the permit application. We include the approval number in your quote up front, so the HOA review doesn’t stall your install by three weeks.
A Sunrise Field Note
We replaced a corroded original aluminum jalousie door on a 1970s CBS home in the Springtree corridor with a PGT impact-rated entry door. The old jamb had decades of moisture damage, so our crew rebuilt it to match the NOA’s required rough-buck depth before anything else. Then our techs pre-drilled the anchor holes to the exact spacing the NOA calls for. When the Broward inspector arrived, he measured, checked the anchor pattern against the printed NOA, and signed off in one visit. That homeowner now has documented large-missile compliance for wind mitigation credits, and the door actually seals tighter than the original ever did. That’s what a Sunrise-compliant door installation looks like.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Sunrise and South Florida since 2011.