Door Installation in Broadview Park — Free In-Home Measure, Written Price

Fast, Reliable Door Installation Across Broadview Park

Door installation in Broadview Park comes with a wrinkle most homeowners don’t see coming: every exterior door, even a single replacement unit, must carry a Miami-Dade or Broward County Notice of Acceptance (NOA) for impact resistance. That’s because Broadview Park sits entirely inside Broward County’s High Velocity Hurricane Zone (HVHZ), one of only two counties in the nation with that designation. The rule is categorically stricter than what a homeowner just 20 miles north in Palm Beach County faces, and it’s why cheap, off-the-shelf doors fail inspection here. We’re Winslow Windows & Doors, and we’ve been installing HVHZ-compliant doors across South Florida since 2011. Ed Winslow’s name is on the business, and on every frame we set. Call (844) 901-4551 for a free in-home measure and a written quote that accounts for Broadview Park’s specific code requirements before we ever pick up a tool.

Call (844) 901-4551

What Door Installation Costs in Broadview Park

In Broadview Park, a typical exterior door replacement runs between $2,800 and $7,500 installed, depending on the opening size, frame material, and glass package. A standard single entry door in a modern CBS home near Davie Road or SW 21st Street usually lands around $3,000 to $4,500. Impact-rated Therma-Tru fiberglass doors add $1,800 to $3,500 over non-impact slabs. If you’re replacing an original 1950s jalousie door on a masonry opening that’s off-square and non-standard, expect to add $400 to $900 for custom framing, buck work, and stucco patching. French door units run $4,500 to $9,000 installed because the two-panel configuration doubles the glass area and the hardware cost. A full-home door package with three to five openings typically lands between $10,000 and $22,000. For exact numbers, call us: we measure every opening, check the rough opening dimensions against the manufacturer’s NOA schedule, and give you a fixed, line-item price before you sign anything.

• Single impact-rated entry door on a standard CBS opening: $2,800–$4,500
• Therma-Tru or PGT impact front entry with custom glass: $4,000–$7,500
• French or double door replacement (impact-rated, HVHZ-approved): $4,500–$9,000
• Replacing a 1950s–1970s jalousie door opening with custom framing and stucco patch: add $400–$900

Call (844) 901-4551 to schedule a free in-home measure. You’ll get a written line-item quote, not a verbal ballpark that disappears when the crew shows up.

Why Winslow Windows & Doors Is Broadview Park’s Preferred Door Installation Company

We’re locally owned by Ed Winslow. That’s not a marketing slogan; it’s a verifiable fact, with a published address and license number you can look up. The difference between us and a big-box installer is what happens when something goes sideways. A national chain hands you a ticket number. Ed hands you his word, backed by the Done Right Promise: if it’s not done right, we make it right. No expiration. No fine print.

Our reputation around Broadview Park is built on showing up when we say we will. Calls are answered by a live person, 24/7, because storm damage doesn’t wait for business hours and neither should you. Every technician who arrives at your door is background-checked, uniformed, and carries identification. You know exactly who is on your property before the truck pulls up. We don’t send subcontractors. We don’t use day labor. And we don’t hand off complaints to a call center.

Broadview Park’s homes, many built on 1950s-to-1970s CBS block, throw curveballs that crews from Fort Lauderdale or Plantation often misread. We know the difference between a standard rough opening and one that was hand-cut 60 years ago for a jalousie slab that no longer exists. We know what the unincorporated Broward County inspector will flag, because we’ve sat through those inspections. That’s local knowledge you can’t fake on a website.

Our Door Installation Services in Broadview Park

Hurricane-Proof Front & Entry Doors

Every exterior door we install in Broadview Park meets HVHZ impact standards, which means a laminated glass interlayer and an anchoring schedule that stands up to wind-driven debris, not just a thick door slab. We stock and install PGT, CGI, and Therma-Tru impact doors, each with a Miami-Dade or Broward NOA on file for the specific configuration. If you’re replacing a hollow-core front entry from the 1980s, we’ll show you the difference between a door that merely meets building code and one that actually protects your family during a storm.

Replacement Doors

Most replacement doors in Broadview Park aren’t straightforward swaps. The original rough opening on a 1950s CBS home is often off-square by half an inch or more, or sized for a jalousie slab that no manufacturer produces anymore. We don’t force a stock slab into an opening that doesn’t fit. We measure, we check the NOA for that exact size, and we build custom framing where needed. The result is a door that latches square, seals tight, and passes inspection the first time.

Storm & Exterior Doors

A storm door isn’t a substitute for an impact-rated entry door, but it adds a second layer of protection and a lot of ventilation for Broadview Park’s humid afternoons. We install storm doors with tempered glass and reinforced hardware, and we always check that the primary door behind them is doing the real work. If your primary door is a hollow slab with no impact rating, we’ll tell you straight: the storm door helps, but it won’t satisfy HVHZ requirements.

French & Double Doors

French doors on the back of a Broadview Park home need to do two things at once: open wide for Florida living and lock down hard for hurricane season. We install impact-rated French and double door units from Therma-Tru and PGT with interlocking astragals, multi-point locking, and laminated glass that holds its rating even when the frame takes a hit. We also fix the threshold and landing drainage issues that make French doors stick, leak, and rot in Broadview Park’s storm-heavy climate.

For the full scope of what our Door Installation team handles, including sliding glass and patio doors, take a look at our service hub.

Common Door Installation Problems We See in Broadview Park Homes

• Non-NOA doors failing HVHZ inspection. A homeowner buys a “hurricane-rated” door from a home center, only to find the inspector won’t pass it because there’s no Notice of Acceptance for that specific rough opening size. We handle the paperwork before the door goes in, not after the red tag.
• Shallow anchoring in hollow-block CBS. Setting a hurricane-rated door frame with short tapcons into hollow block will fail inspection and force a tear-out. Broadview Park’s unincorporated Broward inspectors check embedment depth against the approved anchorage schedule, and we’ve seen crews from other counties miss it.
• Jalousie door openings that don’t match any stock slab. Original 1950s and 1960s jalousie doors leave masonry openings that are off-square, non-standard in height, and often patched by decades of DIY work. Forcing a stock door into these openings means a crooked frame and a failed inspection.
• Threshold rot from poor site drainage. If the entry landing doesn’t shed water away from the door, Broadview Park’s heavy summer rains will rot the threshold and void the manufacturer’s warranty. We check drainage before we set the frame, because a door that holds up for two years isn’t a job well done.

Trusted Brands We Service in Broadview Park

We’re an authorized installer for PGT, CGI, and Therma-Tru, plus ViewLux for select configurations. That authorization matters in Broadview Park because the HVHZ requires a specific Miami-Dade or Broward NOA for each door model and each rough opening size, and we have the engineering data on hand for the units we stock. When you call us about a PGT impact door or a Therma-Tru fiberglass entry, we don’t have to call a distributor and wait three days for an answer. We know the product lines because we install them weekly, and we can usually get replacement parts or hardware within a day or two, not weeks.

Cost Drivers Specific to Broadview Park and Unincorporated Broward County

Every exterior door replacement in Broadview Park carries a set of requirements that a crew working in, say, Plantation or Fort Lauderdale might not fully appreciate. Permitting runs through unincorporated Broward County, not a city building department, and the inspectors enforce HVHZ anchorage schedules strictly. Set a frame without the correct embedment depth into CBS block and you’ll fail inspection, rip out the door, and re-anchor it at your own expense. That’s not a gamble we take.

The acreage lots scattered through Broadview Park add another layer. If your property sits on a well and septic system, the county requires setbacks between any new door swing, landing, or patio construction and the drain field. A door that opens outward onto a landing that extends into the setback will get your permit rejected, not just flagged. We check the site plan and the septic as-built before we quote, because a door that can’t legally be installed isn’t a door worth quoting.

Material haul and equipment access also matter. Some Broadview Park lots are deep parcels with narrow side yards or mature landscaping that block a truck from reaching the back of the house. We scope access before quoting, because carrying a 300-pound impact-rated French door unit 150 feet through a yard adds labor time, and we’d rather tell you that upfront than surprise you mid-job.

Field Notes: A Broadview Park Rotted Entry

On a 1960s CBS ranch off SW 21st Street, we replaced a rotted wood front entry that had warped under decades of salt air and storm-driven moisture. The original rough opening had been hand-cut for a non-standard slab, so our crew set a Therma-Tru impact-rated fiberglass door with a laminated glass interlayer into a custom jamb, shimmed for a true reveal, then stucco-patched the surrounding block after the inspector confirmed the Miami-Dade NOA anchorage schedule. The job took a day and a half. The homeowner has since referred us to two neighbors. That’s how it works here.

Florida Pays You Back

If you’re replacing doors in Broadview Park, there’s a stack of incentives worth understanding before you write the check. The My Safe Florida Home program offers matching grants up to $10,000 for qualifying wind-mitigation upgrades, including impact-rated doors, though eligibility and funding move with state budgets. Florida sales tax on impact-resistant windows and doors is exempt, so that’s cash you don’t pay at purchase. The federal 25C energy credit can return up to $600 annually for qualifying efficient units. And after a wind-mitigation inspection, which typically runs $75 to $150, many Broadview Park homeowners see windstorm premium credits averaging around 25% on the windstorm portion of their policy. We can’t guarantee what your carrier will credit; we can tell you which of our door systems qualify for the documentation those programs require.

Impact Doors vs. Hurricane Shutters: The Broadview Park Math

Some Broadview Park homeowners ask whether shutters are the cheaper route. They are, upfront. But shutters mean you’re hanging panels every time a storm watch hits, storing them somewhere dry, and hoping the hardware holds in a real blow. Impact doors are permanent protection: no panels, no pre-storm scramble, no storage. You walk through them every day, and when the wind picks up, they’re already doing the job. For most homes in Broadview Park, where the HVHZ rating is mandatory on any exterior replacement anyway, impact doors are the only product that satisfies both the building code and the insurance premium credit at the same time.

FAQs — Door Installation in Broadview Park

We Also Serve Cities Near Broadview Park

Our Broadview Park customers aren’t limited to the 33317 ZIP code. We install doors throughout Plantation, Fort Lauderdale, Lauderhill, and Lauderdale Lakes. Same crew, same code knowledge, same Done Right Promise. If you’re just across the line in any of those communities, the rules under unincorporated Broward or their own building departments still demand HVHZ compliance, and we know those inspection cycles too.

Get Your Free Broadview Park Door Estimate

Every door job starts with a free in-home measure at your property in Broadview Park. We check the rough opening, the frame condition, the anchorage points, the drainage, and the permit path before we quote. You’ll get a fixed, line-item price. No change orders. No surprises. Upfront pricing, no trip charge inside the home county, and a permanent 10% discount for seniors and veterans. Ed Winslow’s name is on the door, and on every job we do. The one down the road.

Call (844) 901-4551 to schedule your free estimate.

Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Broadview Park and surrounding South Florida communities since 2011.