Free in-home measure and quote — PGT, CGI and CWS impact lines compared on your actual openings, style by style
Therma-Tru Window Replacement: The Miami Owner’s Guide
Therma-Tru window replacement in Miami typically runs $340–$680 per window installed, depending on the series, glass package, and condition of the existing frame. We stock the common Therma-Tru sash balances, tilt latches, weatherstripping, and insulated glass units on our trucks, so most replacements happen in one visit. What usually brings owners to this page: a window that won’t stay up, a fogged pane that won’t clear, or a sash that suddenly binds when you try to tilt it in for cleaning.
Down here, the salt air and humidity accelerate what would be a 15-year part lifespan in Ohio into an 8 to 10-year reality. Therma-Tru builds a solid entry door, but their windows are workhorses that eventually need attention. That’s where we come in.
Which Therma-Tru Models This Applies To
Therma-Tru’s window line isn’t as sprawling as their door catalog, but there are compatibility traps. We work on the Therma-Tru SlimLine series, the hinged and fixed patio door glass inserts that share their window hardware, and the older Atlantic and Benchmark window units that still turn up in Miami homes built from the late 1990s through the mid-2010s.
The gotcha: Therma-Tru changed their balance shoe design around 2008, and the old and new parts don’t interchange. If you’ve got a pre-2008 unit, you need the older spiral balance with the white nylon shoe, not the newer block-and-tackle setup. We pull the sash, read the stamp on the balance tube, and match it. For insulated glass, Therma-Tru uses several glass suppliers, so we measure the overall thickness with a caliper before ordering anything. Getting this wrong means a sash that binds or a balance that slams the window shut. We’ve seen both.
We’re an independent Therma-Tru installer, not a factory arm, so we give you an honest read on whether you need true OEM or whether a quality aftermarket balance, latch, or weatherstrip does the job for less. For the record, we also stock parts for PGT, CGI, and CWS windows, which covers most of what the rest of Miami has installed.
Signs Your Therma-Tru Window Replacement Is Failing
- The sash drops when you let go. Your balances are shot. In Miami, the dust from construction and salt-laden air works into the balance tube and chews up the internal spring. One side fails first, which makes the sash rack and bind.
- Fog or moisture between the glass panes. The insulated glass unit’s seal has failed. Once humidity gets in, you’ll see condensation that never dries. Miami’s humidity means this spreads from one window to its neighbors within a year or two.
- The tilt latch won’t engage, or the sash pops out. The latch ears wear down, especially on south-facing windows that get hammered by UV. Once a latch fails, the sash can fall out during cleaning and hurt someone.
- The window is harder to open every season. That’s usually the weatherstripping swelling from humidity or the track getting fouled with grime. If you wait, you’ll end up bending the sash frame by forcing it.
- Drafts you can feel with the window closed. Bad weatherstripping, a bowed sash, or a failed glazing bead lets conditioned air escape. Your AC bill will tell you before your hand does.
Replacement Cost & What’s Included
| Service | Typical Range (Miami) | What’s Included |
|---|---|---|
| Balance replacement (both sides) | $180–$300 per window | Parts, labor, sash adjustment, disposal of old balances |
| Insulated glass unit replacement | $280–$520 per sash | Custom-sized IGU, glazing, seal, installation, clean-up |
| Tilt latch + weatherstripping kit | $140–$260 per window | New latches, new weatherstripping, track cleaning, lube |
| Full sash replacement | $400–$680 per sash | New Therma-Tru or equivalent sash, all hardware, fit and finish |
What moves the price: whether the frame itself is still square, whether it’s a second-story window (we bring the ladder), and whether you’re in a condo with hoist requirements. We give you a written line-item quote before we start, and that number doesn’t move unless we find rot or structural damage, and we’ll show you pictures before we charge a dime more. Every replacement carries our Done Right Promise. If it’s not right, Ed Winslow’s name is on the permit, and we come back until it is.
DIY or Call Us?
You can check the easy stuff yourself: look for the manufacturer sticker on the top edge of the sash, measure the visible glass with a tape measure, and snap a photo of the balance tube when the sash is out. That helps us quote faster.
What you shouldn’t do: try to replace a balance spring without a sash removal tool. Those springs are under serious tension, and if that heavy Miami sash drops on a finger or a foot, you’re spending your afternoon at Jackson Memorial. Broken glass is the same story. Insulated glass from Therma-Tru is tempered in most Miami installations, but removing a broken unit without the right gloves and suction cups is a quick way to need stitches.
If you’re not sure, call us. Ed and the techs have been doing this in Miami since 2011, and we’ll give you an honest answer over the phone about whether it’s worth your time to tackle. That call is free, and a real person answers at (844) 901-4551.
FAQs
Plan on 8 to 12 years for the hardware and seals in Miami’s climate. The frame itself can go 20 or more, but balances, latches, and insulated glass seals fail faster here than in drier climates. Call (844) 901-4551 and we’ll tell you honestly whether replacement or full window replacement makes more sense for your situation.
Yes, if the frame is still square and the sash is intact, we can usually replace just the failed balance, latch, or glass unit. Most Miami customers choose that route first. Call (844) 901-4551 for a free estimate, and we’ll show you what’s actually worth fixing.
Most single-window balance or latch replacements take under an hour once we’re on site. An insulated glass unit that isn’t on our truck takes one to two weeks to fabricate, then about 45 minutes to install. We’ll give you a straight timeline before we start.
We stock common balances, latches, weatherstripping, and a range of insulated glass dimensions on our trucks. Unusual sizes or older series sometimes need a fabrication run. Either way, you’ll know before we leave your driveway what’s possible same-day and what has to wait for the factory.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Miami and nearby areas.










Before
After
Before
After
Before
After