PGT Shingle, Tile & Metal Roofing Nationwide | Winslow Windows & Doors

PGT Shingle, Tile & Metal Roofing in Miami: What to Know First

Winslow Windows & Doors provides independent PGT shingle, tile, and metal roofing installation and replacement across Miami, typically completing full reroofs within five to eight working days once materials arrive and weather clears. We quote every job with fixed, line-item pricing before work begins, because our position on estimates is simple: the number we write down is the number you pay. No change orders for things we should have caught in the walkthrough. If you own a PGT roof or are considering one for your Miami home, this page covers what actually happens to these systems in our salt air and storm cycles, what repairs cost, and why we approach the work differently than a crew that treats every roof the same. Call (844) 901-4551 to schedule a free estimate.

Call (844) 901-4551

Key Takeaways

• We install and repair PGT shingle, tile, and metal roofs as an independent provider — we are not a PGT subsidiary, and we don’t pretend to be one.
• Miami’s salt air, UV exposure, and wind-driven rain create failure patterns in PGT systems that you won’t see listed on a national warranty PDF.
• Fixed pricing and the Done Right Promise apply to every PGT roofing job we take. Ed Winslow’s name is on the work.

How PGT Products Fail — and How We Fix Them

PGT builds solid roofing products, but every system has weak points, and Miami knows how to find them. Here’s what we see most often, what’s actually going on, and how we address it:

• PGT architectural shingle granule loss near ridge caps and hip lines. The constant sun loading on Miami’s south-facing slopes cooks the asphalt at the ridge, where the shingle bends over the peak and gets worked by wind uplift every afternoon storm. Granules strip off, the mat underneath starts to degrade, and water finds the nail line. We remove the affected cap shingles, replace the underlayment at the transition, re-nail to PGT’s specified pattern, and install new ridge caps with a stronger adhesive bead than the original.
• Tile-to-deck attachment failures on PGT tile systems after repeated micro-flexing. Concrete and clay tile roofs in Miami expand and contract daily, and over several years, the nails or screws holding the tile to the batten can back out slightly. Then a strong gust gets under the tile and you hear the telltale click-clack from the street. We strip the affected area, inspect the underlayment, and refasten using a two-screw pattern that exceeds PGT’s minimum so the tile doesn’t ride up again.
• Metal roof oil-canning stress at PGT standing-seam panel laps. We see this on metal roofs installed by crews that didn’t account for Miami’s overnight-to-noon temperature swings. The pans, when cut too tight at the eaves, have no room to expand, so the lap joints start to oil-can and the sealant splits. We release the stressed runs, trim the pans to allow proper thermal movement, and reseat the laps. If a panel is creased beyond saving, we source a matching gauge and profile from PGT’s current lineup rather than patching it with off-the-shelf sheet metal.
• Flashing and tie-in deterioration where PGT roofing meets exterior walls. Miami’s wind-driven rain pounds the base flashing at all wall-to-roof transitions, and caulk-and-go repairs are the number one thing we see failing within a year of another contractor’s “fix.” We cut back the stucco or siding at the transition, install new step and counter flashing in galvanized or aluminum matching the existing system, and seal with a polyurethane caulk rated for continuous UV and salt exposure.
• Underlayment saturation at PGT tile valleys during heavy rain. Valley metal is a chokepoint on any tile roof, but on PGT barrel-profile tile, the deep channels concentrate runoff faster than the valley can clear. If the valley metal wasn’t bedded in properly or the adjoining tile was cut slightly short, water gets underneath and into the field. We pull the valley tiles, replace the valley metal and the lower underlayment, and reset the tiles with proper overlap so the water stays on top of the metal.

Our PGT Shingle, Tile & Metal Roofing Process

Every PGT job follows the same steps, whether it’s a kitchen-side repair or a full reroof on a 1950s Coral Gables bungalow:

1. 1
   Call and walkthrough. You reach a live person at (844) 901-4551. We schedule a time that works, and a uniformed, background-checked technician arrives at your Miami home. No voicemail tag.
2. 2
   Roofing diagnosis. We inspect the system end to end: the roofing material, the underlayment, the flashings, the penetrations, and the transitions at walls, chimneys, and skylights. We document everything with photos you can see.
3. 3
   Parts decision: OEM vs. quality aftermarket. If PGT parts are available and in good supply, we use them. If the part is discontinued or backordered for a season, we tell you exactly what aftermarket equivalent we’d use, why it’s compatible, and what it means for your warranty. No quiet substitutions.
4. 4
   Fixed line-item quote. We hand you a written estimate that shows material, labor, and time. That number is the number. The Done Right Promise applies from this moment forward.
5. 5
   The work. Crews arrive on schedule, protect the property, and complete the job in the window we gave you. We don’t stack four jobs on one day and run crews ragged.
6. 6
   Final test and walkthrough. We water-test repaired areas where practical, clean the site, and review the work with you before we call the job done. If it’s not done right, we come back. Ed Winslow’s name is on the permit. That means he’s not going anywhere until it’s right.

What PGT Shingle, Tile & Metal Roofing Costs in Miami

Miami pricing on PGT roofing runs higher than the national averages, and for good reason: our local building code demands stronger fastening, more underlayment, and tougher wind-uplift standards than most of the country. Here’s what that looks like in real numbers:

What moves the number: roof deck condition once tear-off begins, how many tie-ins and penetrations exist, tile profile and barrel depth, and whether your Miami roofline needs new drip edge or fascia work. We don’t hide unknowns in the bid; we walk the roof first and price what’s there. Call (844) 901-4551 for an exact quote — the estimate is free, and we’ll show you the line items.

Why Miami Homeowners Call Winslow Windows & Doors for PGT Work

Ed Winslow started this company in 2011 after years of watching Miami homeowners get burned by contractors who promised one thing and delivered another when the next storm hit. The Done Right Promise exists because a one-year or three-year warranty isn’t worth the paper it’s printed on when a roof fails at year four: if we didn’t do it right, we make it right. We answer the phone 24/7 with a live person. Our technicians are background-checked, uniformed, and know PGT products from the underside of the deck to the cap shingle, because we install the brand. And when PGT isn’t the right fit for a homeowner’s budget or timeline, we’re authorized to install CGI, CWS, ES Windows, and ECO Window Systems as well, so our recommendation is driven by what’s best for your roof, not by what’s left in the warehouse. We’re the one down the road.

FAQs