Free in-home measure and quote — PGT, CGI and CWS impact lines compared on your actual openings, style by style
PGT Door Installation in Miami: What to Know First
We install, replace, and repair PGT doors throughout Miami, including entry doors, French doors, and hurricane-rated front doors. Most installations are completed in one day once the door is on-site, and you’ll get a written line-item quote before any work begins, so there’s no guessing on price. If you own a PGT door that’s sagging, sticking, or not sealing the way it used to, call (844) 901-4551 and we’ll send a technician who knows these doors specifically.
This page is written for Miami homeowners who already own PGT products, or who are considering them, and want installation done by a crew that understands how these particular doors behave in South Florida’s heat, humidity, and hurricane season. We’ve been installing PGT doors since 2011, and as an independent PGT service provider, we’re not tied to a manufacturer’s script. We tell you what the door needs and what it doesn’t.
How PGT Products Fail, and How We Fix Them
PGT builds a solid door. But every product line has its tendencies, and after 15 years of installing and servicing them across Miami, we’ve learned where they show wear and how to correct it without creating new problems. Here are the failure patterns we see most often on PGT door installations.
- Sagging on PGT WinGuard entry doors. The WinGuard line is heavy by design, with laminated impact glass adding real weight to the slab. When hinges aren’t torqued correctly, or when the original installer used shorter screws than the frame can handle, the door gradually drops. You’ll notice the lock bolt scraping the strike plate or daylight at the top corner. We pull the slab, reset the hinges with proper-length fasteners, and re-square the frame before remounting. It’s not a temporary adjustment, it’s a correction.
- Roller wear on PGT sliding glass doors. Miami’s salt air and fine sand work their way into roller tracks faster than most homeowners expect. On PGT sliding doors, we typically see the stainless rollers themselves holding up, but the housing and adjustment screws corroding. Symptoms include a door that moves hard in the middle of the track but fine at the ends, or a door that suddenly drops a quarter inch. We replace rollers with corrosion-resistant components and clean the track bed so the new parts aren’t grinding through debris from day one.
- Threshold seal compression on PGT French doors. Double door configurations put twice the wear on the center astragal and threshold gasket, especially on homes in neighborhoods like Kendall and Pinecrest where afternoon storms beat directly on west-facing entries. The original sweep compresses over two or three summers, and suddenly you’ve got water staining the interior floor after a heavy rain. We replace the sweep and adjust the interlocking astragal so the two slabs meet tight and drain correctly.
- Fogging between panes on older PGT insulated units. This isn’t unique to PGT, but we see it on Miami homes with doors that face consistent morning sun, like those on the east side of Coral Gables. The laminated impact glass is doing its job, but the interior insulating seal has failed. The fix is glass replacement within the existing frame, which preserves the door’s structural integrity and keeps the warranty discussion straightforward.
- Strike plate misalignment after settling. South Florida homes shift. It’s a fact of building on this soil, and it shows up at the door frame. The deadbolt on a PGT entry door starts requiring a shoulder or a lift, and most people assume the door is warped. More often, the frame has settled a fraction and the strike plate needs remortising. We reset the plate and reharden the screw holes with longer anchors into the jack stud. Five minutes of adjustment, but it saves the door from being blamed for something the house did.
Our PGT Door Installation Process
Every PGT door job follows the same sequence, whether it’s a single entry door in Wynwood or a full French door replacement in Coconut Grove. Here’s how it works.
- 1
You call (844) 901-4551. A live person answers, takes down what you’re seeing, and schedules a time that works. No phone trees, no callbacks four days later.
- 2
Our technician shows up, in uniform, with a name you already know. We inspect the door, the frame, the threshold, and the wall condition around the opening. We take measurements and check how square the rough opening actually is, because that determines what’s possible.
- 3
We give you a written, line-item quote. If it’s a repair, you’ll see the parts and labor broken out. If it’s a replacement, you’ll see the door, hardware, installation, and any frame work listed separately. We don’t bundle things into a mystery number.
- 4
We make the parts decision with you. For PGT doors, OEM parts preserve the cleanest warranty path, and we default to them. Where OEM isn’t available or doesn’t make sense for the age of the door, we offer quality aftermarket components and tell you exactly what that means for performance and longevity. You decide with full information.
- 5
The installation happens on schedule. We protect the floors, remove the old door, correct any rough opening issues, set the new slab with proper clearances, flash and seal against water intrusion, and install hardware to manufacturer torque specs.
- 6
We test the door in front of you. Locks, latches, sweep contact, drainage plane, operational smoothness. Then we walk the site with you, answer questions, and clean up completely. Our work is backed by the Done Right Promise, so if something isn’t right, we come back. That promise doesn’t expire in a year or five or thirty.
What PGT Door Installation Costs in Miami
PGT door pricing in Miami depends on the job, but honest ranges beat vague promises. Here’s what we typically see.
- Entry door installation (labor only, door already purchased): $450 to $900, depending on frame condition and hardware complexity.
- Sliding glass door installation (labor only): $600 to $1,200 for standard sizes. Oversized openings in homes along the water can run higher.
- French or double door installation (labor only): $800 to $1,600, depending on the astragal configuration and whether the rough opening needs correction.
- Full replacement including new PGT door: $3,500 to $9,000, driven mostly by door size, glass package, and hardware grade.
- Common repairs: roller replacement, hinge reset, threshold sweep, strike plate remortise: $180 to $420. Our standing $40 discount applies to any repair over $200.
What moves the price: rough opening condition, whether we’re pulling a permit, hardware finish and grade, and whether the home is in a coastal zone requiring specific product approvals. You’ll know every line before we start. Call (844) 901-4551 for a free estimate, and if you have a written estimate from another contractor, bring it. We’ll give you a free second opinion on it, no trip charge in the home county.
Why Miami Homeowners Call Winslow Windows & Doors for PGT Work
We’re locally owned by Ed Winslow, and we’ve been doing this since 2011. We publish our address and license number. When you call, a live person picks up, 24/7, every day of the year. The technician who shows up at your door is background-checked, uniformed, and knows PGT doors because we work on them constantly, not occasionally.
Beyond PGT, we install and service doors from CGI, CWS, ES Windows, and ECO Window Systems, so if a PGT replacement isn’t the right fit, we can give you an honest comparison and let you decide. Our Done Right Promise means if it’s not done right, we make it right. That’s not a warranty that expires when the check clears. That’s Ed’s word. My name’s on the permit. That means I’m not going anywhere until it’s right.
FAQs
PGT warranties generally require installation by a licensed professional following manufacturer specifications, and improper installation can void coverage on the glass and frame. We install PGT doors to factory specs and keep documentation so your warranty path stays clean.
Most entry door installations are completed same day once the door is on-site. French doors and sliding doors can run one to two days depending on the rough opening work required. We’ll tell you the timeline before you commit. Call (844) 901-4551 for specifics on your opening.
If the slab is structurally sound, the frame is square, and the issue is hardware, rollers, seals, or glass, repair is usually the right call and costs far less than replacement. If the frame is compromised, the door has taken storm damage, or the glass package no longer meets current Miami-Dade code, replacement makes long-term sense. We’ll give you a straight assessment either way, and a free estimate to back it up.
We can install doors you’ve already purchased, provided the product is new, correctly sized for the opening, and carries proper Miami-Dade product approval for your wind zone. We’ll inspect the door and the opening before scheduling, so there are no surprises on installation day.
Yes. We pull permits where required, and we handle the inspections. Door openings are structural points in your home, and we don’t cut corners on the paperwork. It protects your home, your insurance standing, and the product warranty.
Get Your PGT Door Installed Right in Miami
If you need PGT door installation in Miami, or you’ve got a PGT door that isn’t operating the way it should, call us at (844) 901-4551. We answer live, we show up on time, and we give you a written quote before any work begins. Free estimates, no trip charge in the home county, and a door that gets done right the first time. We’re the one down the road.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Miami and nearby areas.










Before
After
Before
After
Before
After