Free in-home measure and quote — PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterMr-Glass Window Installation in Miami: What to Know First
Mr-Glass window installation in Miami typically runs $350 to $1,200 per window for full replacement work, with most single and double hung installs landing between $500 and $850. Winslow Windows & Doors is an independent Mr-Glass service provider, not a factory operation, and we complete most Mr-Glass window installations within three to seven days of your estimate. That’s the straight answer. This page is for Miami homeowners who already own Mr-Glass windows, need them installed or replaced correctly, and want someone who picks up the phone when the humidity hits and a window starts sticking. Call (844) 901-4551 for a free estimate and we’ll get you sorted.
How Mr-Glass Products Fail — and How We Fix Them
- Mr-Glass 7600 Series single hung: balance shoe drag. We see this constantly in older Miami homes, especially in neighborhoods like Shenandoah and Westchester where single hungs went in 15 to 20 years ago. The vinyl balance shoe flexes under Miami heat and the window becomes a two-hand push. Most contractors tell you the window’s shot and sell you a new one. We replace the balance assembly, re-lube the track, and that window runs smooth again for a fraction of replacement cost.
- Mr-Glass horizontal roller 7800 series: roller housing collapse in salt air. If you live east of US-1 in neighborhoods like Brickell or Coconut Grove, the cast aluminum rollers inside the 7800 eventually bind from salt corrosion and the sash comes off its bottom track. The window still closes, which tricks homeowners into ignoring it until the sash falls on someone’s hand. We do a full roller swap, align the interlock, and check the top track for wear before we call it done.
- Mr-Glass 3-panel sliding 7400: center panel drift. Miami’s afternoon thunderstorms slam these big sliders with water, and when the weep holes clog, water pressure shoves the center panel toward the frame. Homeowners call it a warped window. It’s actually a clogged weeper and a missing end cap, two parts we keep on the truck in Miami.
- Mr-Glass casement 7200: crank gear stripping in high wind. On waterfront lots in Key Biscayne or North Bay Village, casement crank gears strip because owners crank them shut against wind pressure. The window itself is fine. We replace the operator gear and the hinge arm, then re-seat the weatherstripping so the next storm doesn’t stress the new gear.
- Mr-Glass picture 7900 fixed windows: glazing bead de-lamination. Fixed windows don’t move, but their glazing beads sit in direct sun all day. Miami UV breaks the vinyl bead clips after eight to ten years and the bead pops loose, especially on west-facing walls in Doral and Hialeah. We re-glaze the frame, replace the bead with a current-spec clip system, and the window holds like it did on day one.
Our Mr-Glass Window Installation Process
- 1
Call (844) 901-4551. A live person answers, takes your address and what you’re seeing, and we schedule the walkthrough. No voicemail loop, no call center.
- 2
One of our background-checked techs comes out in uniform, measures the rough opening, checks the existing frame for rot or water damage, and looks at how the old window was flashed. We’re looking for what caused the failure, not just what failed.
- 3
We give you a written, line-item estimate. You’ll see the exact window, the exact parts, the exact labor, and the exact date we’ll start.
- 4
We decide together on OEM Mr-Glass parts versus quality aftermarket. If the window is under warranty, we use OEM so you don’t void it. If it’s out of warranty, we tell you honestly which aftermarket part will outlast the original, and we let you choose.
- 5
Installation day: we pull the old window, repair any water damage we find, flash and seal the opening to Miami hurricane code, set the new Mr-Glass unit, and trim it out. You’ll see us test the window in front of you.
- 6
We walk the job with you, hand you the warranty paperwork, and clean up everything including the dust on your sill. If it’s not done right, Ed Winslow comes back. The Done Right Promise is not marketing language.
What Mr-Glass Window Installation Costs in Miami
| Job | Typical Miami Range |
|---|---|
| Single hung Mr-Glass 7600 install | $350 – $650 |
| Double hung Mr-Glass 7600 install | $450 – $850 |
| Horizontal roller Mr-Glass 7800 install | $400 – $750 |
| 3-panel sliding Mr-Glass 7400 install | $700 – $1,200 |
| Casement Mr-Glass 7200 install | $550 – $950 |
| Picture or fixed Mr-Glass 7900 install | $450 – $900 |
What moves the price: frame condition, whether we’re opening drywall or stucco, access height, and whether Miami-Dade inspection is required for the opening type. We show you every number before you sign. No change orders, no surprise line items. Call (844) 901-4551 for an exact quote. It’s free.
Why Miami Homeowners Call Winslow Windows & Doors for Mr-Glass Work
We’ve been doing this since 2011, and we’ve installed every Mr-Glass line that shows up in Miami homes, from the 7200 casements in older Coral Gables bungalows to the 7900 picture windows in newer Kendall builds. Ed Winslow’s name is on the door, on the permit, and on every job we do. If you have a written estimate from another company, bring it to us for a free second opinion. We often find line items that don’t need to be there. We also install PGT, CGI, CWS, and ES Windows, so if your Mr-Glass window is a lost cause and you’re better served by switching brands, we’ll tell you that instead of selling you a repair that won’t last. No trip charge inside Miami-Dade. Ten percent off for seniors and veterans, always. $40 off any repair over $200, every day. A neighbor you can call at 2 a.m. and someone will actually answer.
FAQs
No. We’re an independent Mr-Glass service provider, which means we work on the windows without the pricing overhead of a factory-authorized program. What that means for you is lower labor rates and straight answers about whether OEM parts actually matter for your specific window. In many cases the factory part is the right call; in others, the aftermarket option lasts longer in Miami humidity. We tell you which is which.
No. We follow Mr-Glass’s published installation specs on every install, and we use OEM parts when the window is still under warranty. You keep your coverage. We photograph each step of the job so you have documentation if the manufacturer ever asks. Call (844) 901-4551 and we’ll walk you through what your specific warranty covers.
Most Mr-Glass installs are completed within three to seven days of your estimate. Stock windows move faster. If the unit needs to be ordered to size, we’ll tell you the lead time up front and honor it. This is not a one-day remodeling job; it’s a window that has to seal and hold water the way it’s supposed to, so we take the time the job needs.
If the frame is solid and only the hardware or balance has failed, repair it. You’ll spend $150 to $400 instead of $500 to $1,200, and the window will run like new. If the frame is rotted, the thermal seal is blown, or the window’s over 20 years old, replacement is usually the smarter money. We’ll show you the window, explain what we’re seeing, and let you make the call without pressure.
No. The price on your written estimate is the price you pay. If we open a wall and find water damage, we stop, show you the damage, and give you a written change order for just that scope before any additional work happens. We don’t surprise you on the invoice. We don’t hold your window hostage. Ed Winslow’s name is on the permit, and his number is on your estimate.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Miami and nearby areas.