Energy-Efficient Windows in Hollywood — Free In-Home Measure, Written Price

Fast, Reliable Energy-Efficient Windows Across Hollywood

Energy-efficient window replacement in Hollywood runs $800 to $1,500 per window for impact-rated units, with whole-home packages starting around $8,000. Most Hollywood homes need a Miami-Dade NOA approved window because this city sits inside Florida’s High Velocity Hurricane Zone, a designation shared only with Miami-Dade County. That single fact changes which windows survive here and which ones fail inspection. Call (844) 901-4551 for a free in-home measure and a written quote that accounts for your specific opening count, frame material, and distance from the salt line.

Call (844) 901-4551

What Hollywood’s Salt Air Does to the Wrong Window

We pull more corroded aluminum frames out of Hollywood homes than any other failure we see, and it’s not close. The barrier island in 33019 and the blocks east of US-1 sit in persistent salt-laden air that eats standard aluminum window frames, balcony door tracks, and hardware within five to ten years. A window that would last 20 years in Weston will seize up and fail on Hollywood Beach in half that time if it was spec’d inland-style with uncoated steel fasteners and standard mill-finish aluminum. This isn’t a theory we read about. It’s what we find when we cut into the rough opening.

That’s why the material conversation in Hollywood has to happen before the price conversation. A homeowner shopping two quotes might see a $300 difference per window and think the cheaper bid is the smarter one. But if that cheaper bid specifies uncoated aluminum frames and standard fasteners for a home three blocks off the Intracoastal, the cheap spec costs more within a decade, because the tracks seize, the sashes misalign, and the whole unit has to be torn out and replaced again. The coastal-spec version runs 20 to 30 percent more on the front end and is the only version worth installing east of US-1.

HVHZ wind-load requirements compound this. Hollywood windows must carry a Miami-Dade Notice of Acceptance (NOA) product approval number, not just a Florida Product Approval sticker. That’s a stricter standard covering large-missile impact, cyclic wind pressure, and water infiltration. Many national window brands sold at big-box stores carry Florida Product Approval but never submitted their units for Miami-Dade NOA testing. They pass in Fort Lauderdale and Cooper City, and they’re non-compliant in Hollywood. If a window lacks the NOA number for the specific configuration being installed, the inspection fails and the window comes out. We’ve seen it happen on permitted jobs where the homeowner bought windows online thinking they’d save money.

Every window and door replacement in Hollywood, from a 1958 CBS bungalow near Young Circle to a beachfront tower on A1A, must clear this standard. That’s the local reality that shapes everything else on this page. If you want to dig into the full service picture, start with our Energy-Efficient Windows hub page. But if you’re already in a Hollywood home and wondering why three different window companies gave you three different stories about what’s code-legal here, keep reading.

Why Winslow Windows & Doors Is Hollywood’s Preferred Energy-Efficient Windows Company

Ed Winslow’s name is on the business, and he has one published address and license number, not a network of shell companies. That matters in Hollywood because this city’s HVHZ code makes window replacement more complicated than almost anywhere else in Florida. A contractor who doesn’t do masonry cutting on 1950s and 1960s CBS homes, who doesn’t know which PGT and CGI configurations carry Miami-Dade NOA approvals, and who doesn’t understand salt-air hardware requirements will either lose the inspection or leave you with windows that fail early. We’ve spent over 15 years in this market since founding in 2011, and our Energy-Efficient Windows in Hollywood work is built on reading the specific rough openings and wind zones this city throws at you.

Customers in Hollywood call us for Hollywood Roof Repair and windows because a live person answers the phone at 2 a.m., not a voicemail loop. Our technicians are background-checked and arrive in uniform, so you know exactly who’s at your door before the truck pulls up. On a 1964 CBS ranch in the 33021 ZIP near Hollywood Boulevard, our crew removed the original jalousie sashes from their narrow rough openings and found chloride-stained aluminum tracks that had fused to the masonry. We reframed each opening to accept PGT 5500 series vinyl impact windows with an insulated laminated glass unit, argon-filled low-E glass and a .060 interlayer, cutting the existing masonry without spalling, then sealed the new jambs with marine-grade stainless fasteners rated for HVHZ exposure. The homeowner’s energy audit showed a 27% drop in cooling load the first summer, and the new windows now qualify for wind mitigation credits under Florida Statute 627.0629.

That’s the kind of job we do in Hollywood. Not a generic swap-out. A reframe that accounts for the original CBS construction, the wind zone, the salt exposure, and the energy performance all at once.

Our Energy-Efficient Windows Services in Hollywood

We focus on the window work that actually moves the needle in Hollywood’s climate: glass packages that block solar heat gain, frames that survive salt air, and audits that tell you where your cooling dollars are leaking. Here’s what that looks like.

Insulated Laminated Glass

This is the workhorse spec for Hollywood. Insulated laminated glass pairs an outer pane of tempered or annealed glass with a laminated inner layer, typically with a .060 interlayer, inside a sealed unit filled with argon gas. The laminate gives you the impact rating for HVHZ compliance. The argon fill and low-E coating give you the thermal break that cuts cooling load. In Hollywood’s western ZIPs like 33027 and 33029, where 1990s and 2000s homes may already have impact-rated glass but aging sills and failing seals, we often reuse the existing framing and rebuild the glazing unit itself.

Window Energy Audits & Ratings

Before we quote a window, we need to know what’s actually leaking. In a Hollywood home, that audit looks at original single-pane aluminum frames, missing or failed glazing seals, uninsulated metal frames conducting heat straight into the room, and solar orientation. Homes in 33020 and 33021 with original jalousie windows can’t just get film or new glass, we’ll get to that in the FAQs. The audit tells you the cooling-load reduction you can realistically expect from replacement, and in many cases we can show you the math on a 20 to 30 percent electricity reduction during the summer months.

UV-Blocking & Fade Protection

Hollywood sun is relentless, and it does real damage to floors, furniture, and artwork. UV-blocking low-E coatings filter out the ultraviolet spectrum that causes fading while still letting visible light through. This matters most on south and west-facing elevations, which in Hollywood’s grid layout means a lot of living rooms and bedrooms take direct afternoon sun. The upgraded low-E coatings we specify are available across our authorized brands, PGT and CGI included, and they’re built into the insulated laminated units rather than applied as an aftermarket film.

Low-E & Argon Gas Glass

Low-E is a microscopic metallic coating applied to one surface of the glass. It reflects infrared heat back toward the outside in summer and back inside in winter. Argon gas between the panes further slows heat transfer. In Hollywood, a home with single-pane aluminum windows from the 1960s might see a cooling-load reduction of 25 to 30 percent after switching to argon-filled low-E units. The savings vary by orientation, shading, and how much glass faces east and west. But the direction of the change is never in question, less heat comes through the glass, and your AC runs less.

Common Energy-Efficient Windows Problems We See in Hollywood Homes

• Salt-air corrosion on standard aluminum frames. Homes on the barrier island in 33019 and the blocks east of US-1 lose window hardware to chloride corrosion within five to ten years. Standard uncoated steel fasteners rust through, aluminum tracks pit and seize, and sashes stop sliding. The fix is marine-grade stainless fasteners and frames with coastal-rated finishes, not just a new coat of paint.
• Jalousie windows that can’t legally remain. Original louvered glass-slat windows in Hollywood’s 33020 and 33021 neighborhoods are non-compliant with current HVHZ code. They can’t stay after a permitted renovation, and they can’t be retrofitted with film or new glass to meet the standard. They have to come out, and the rough opening has to be reframed within the existing CBS masonry.
• Non-NOA windows that fail inspection. A homeowner buys impact windows from a big-box store or an online retailer, the unit carries Florida Product Approval but not Miami-Dade NOA, and the inspection fails. The windows get torn out and the homeowner eats the cost. We’ve watched this happen more times than we can count in Hollywood specifically, because this city sits inside the HVHZ boundary when neighboring Broward cities do not.
• Hairline cracks from improper masonry cutting. Original CBS rough openings in Hollywood’s 1950s through 1970s homes are narrow, and cutting them wider without the right saw work causes spalling and hairline cracks along the jamb. Those cracks compromise the impact rating and are only visible during the pressure-testing cycle after the first hurricane. The contractor who doesn’t know how to cut CBS without spalling loses the job to one who does.

What Energy-Efficient Windows Costs in Hollywood

A single impact-rated energy-efficient window in Hollywood runs $800 to $1,500 installed, using real numbers from our jobs across the city. An impact single-hung typically lands between $900 and $1,800 depending on size and finish. Large or custom openings, picture windows, radius tops, bent-glass corners, and Custom & Geometric Windows in Hollywood run $2,500 to $5,000 each. Whole-home packages start around $8,000 for smaller CBS homes and climb past $25,000 on larger properties or homes with extensive glass, especially east of US-1 where coastal-spec hardware and marine-grade finishes add 20 to 30 percent to the per-unit cost.

What moves the price in Hollywood? Opening count, first. Floor height, because second-story and high-rise work carries different wind-load requirements and access costs. Frame material, vinyl versus aluminum versus composite. Glass package, single-pane impact versus insulated laminated with argon and low-E. And the distance from the salt line, which dictates whether we’re specifying standard fasteners or stainless, standard finishes or marine-grade. A window for a 2001 home in 33027 will cost less than the same-size window for a 1962 CBS bungalow in 33020, because the latter often requires masonry reframing and allows for no shortcuts on the HVHZ details.

We don’t bid jobs with vague allowances and change orders. You get a written line-item quote, fixed pricing, and a free in-home measure. Call (844) 901-4551 to schedule yours. If you have a written estimate from another company, we’ll give you a free second opinion on it, no obligation.

Trusted Brands We Service in Hollywood

Winslow is an authorized installer for PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. For Hollywood’s HVHZ requirements and salt-air conditions, we most often specify PGT 5500 and 6500 series vinyl impact windows, CGI aluminum impact units for high-rise and beachfront work, and CWS for custom openings where a standard unit won’t fit the existing masonry. We maintain close relationships with these manufacturers and can confirm Miami-Dade NOA approval numbers for your exact configuration before you sign anything. That’s not a detail we leave to chance. Many national brands simply don’t have NOA approvals for the configurations Hollywood requires, and we won’t sell a window that can’t pass inspection here.

Florida Pays You Back

Hollywood homeowners have a few programs stacked in their favor right now. The My Safe Florida Home program offers matching grants up to $10,000 for qualifying wind-mitigation upgrades, and impact windows with the right NOA numbers are eligible. Florida offers a sales-tax exemption on impact-resistant windows and doors, which saves you 6 to 7 percent on the material portion of the job depending on local surtax. The federal 25C energy credit returns 30 percent of the product cost, up to $600 per year, on qualifying energy-efficient units. And windstorm-premium credits, after a wind-mitigation inspection that typically runs $75 to $150, average around a 25 percent reduction on the windstorm portion of your policy. Programs and carriers set the final numbers, so we’ll point you to the right documentation rather than promise a specific dollar amount.

You should also understand that a “Florida Product Approval” certification alone is insufficient in Hollywood. This city falls entirely within the HVHZ, which means the unit must carry a Miami-Dade NOA number for the specific configuration being installed, glass type, frame, size, method of attachment. Big-box retail installs and online window sellers often can’t produce that number. A licensed impact specialist, the kind who pulls permits and passes inspections in Hollywood every week, can. That’s the comparison that matters more than price per window.

Pricing for Energy-Efficient Windows in Hollywood, FL

We Also Serve Cities Near Hollywood

Winslow’s crews run daily routes through Andover, Miramar, West Park, and West Hollywood. If you’re in one of those communities and need the same HVHZ-compliant, salt-air-spec work we do across Hollywood, call (844) 901-4551 and we’ll get you on the schedule. No trip charge inside the home county.

FAQs, Energy-Efficient Windows in Hollywood

Call Winslow for a Free Estimate in Hollywood

If your windows are original to a 1950s through 1970s CBS home, if you’re east of US-1 watching your aluminum frames pit and seize, or if you’ve been told your jalousie windows can’t stay after a renovation, we can help. Ed Winslow’s name is on the door and on every job we do. Upfront pricing, written line-item quotes, permits pulled, inspections passed, and our Roof Replacement & Installation in Hollywood backed by the Done Right Promise behind it all. A neighbor you can call at 2 a.m., and someone will actually answer.

Call (844) 901-4551 to schedule your free in-home estimate.

Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Hollywood since 2011.