Free in-home measure and quote — PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Pine Island Ridge
Door installation in Pine Island Ridge runs $1,100–$4,800 for most single-door replacements, with impact-rated entry doors typically landing between $2,800 and $6,500 depending on size and frame condition. Most jobs on the Ridge are permitted and installed in as fast as a single day once your door arrives, though custom fabrication adds 4–6 weeks. If you’re in the 33328 zip and your front door hasn’t been touched since the Carter administration, call (844) 901-4551 and we’ll walk you through exactly what a replacement on your street will take.
Pine Island Ridge isn’t like the rest of western Broward. The homes here sit on an actual limestone ridge, one of the few elevated landforms in an otherwise pancake-flat county. That elevation sounds nice until a tropical system pushes wind-driven rain off the Everglades and straight into your east-facing entry. We’ve been opening up 1970s and 1980s CBS walls on the Ridge long enough to know what’s behind the stucco before we touch it. That’s the difference between a door that passes inspection and one that fails it. Call (844) 901-4551 for a free in-home measure.
Key Takeaways:
- Every door replacement in Pine Island Ridge needs a Broward County HVHZ permit with a Florida Product Approval number. No exceptions. Not even for a single front door.
- Most single-door installs run $1,100–$4,800; full impact-rated entry systems run $2,800–$6,500.
- Your original 1975–1990 rough opening likely has stucco-return framing that needs reframing before a new product can pass design pressure.
- We install Therma-Tru, PGT, and CGI impact doors rated for Broward’s High-Velocity Hurricane Zone.
- Free written estimate. $40 off any repair over $200. 10% off for seniors and veterans. Permanent.
Why Winslow Windows & Doors Is Pine Island Ridge’s Preferred Door Installation Company
Ed Winslow started this company in 2011 and put his name on it. He still answers the phone. That matters on the Ridge, where homeowners have been burned by crews that drive down from Palm Beach County with non-HVHZ impact products, get red-tagged by the Broward inspector, and vanish back north with a deposit. We don’t do that. Every door we hang in Pine Island Ridge carries a Florida Product Approval number that matches the opening’s design pressure rating. The inspector sees our paperwork, runs the number, and passes it. That’s not a coincidence. It’s the only way we work.
We know the Ridge’s housing stock because we’ve worked on it. The single-story CBS homes between SW 10th Street and the western edge near the Everglades were all built in the same window: roughly 1975 to 1990. Same aluminum sliders. Same stucco returns. Same rough-opening quirks. A national chain’s installer will show up with a standard order sheet and a blank stare when the jamb doesn’t match the spec sheet. Our crew’s seen it five hundred times. We measure for it on the first visit. That’s why Pine Island Ridge homeowners call us back when the patio door goes.
And you’re never calling into a voicemail tree. A live person picks up, 24/7. Ed’s name is on the door and on every job we do.
Our Door Installation Services in Pine Island Ridge
Every home on the Ridge has at least three exterior doors that predate Florida’s post-Andrew impact codes. Here’s what we handle most often for your neighbors, and what it takes to do it right in the 33328.
Entry Doors
A new front door on a Pine Island Ridge CBS home does more than change the curb appeal. It’s the first line against wind-driven rain and the first thing an insurance wind-mitigation inspector looks at. We install Therma-Tru fiberglass entry systems sized to your existing rough opening, and we reframe the jamb when the stucco return has shifted, which it usually has after 40 years of settling on the ridge. You get a door that closes square, seals tight, and carries a Florida Product Approval number the inspector can verify on the spot.
Hurricane-Proof Front & Entry Doors
This is the work we do most on the Ridge because it’s the work your insurer actually rewards. A hurricane-proof entry door in Pine Island Ridge means a product with a Miami-Dade NOA for large-missile impact, installed to HVHZ design pressure. We install PGT and CGI impact doors and frame the opening to the exact DP rating the product approval specifies. Not a generic “impact-rated” door from a big-box aisle. A door that passes a Broward County inspection the first time. That’s the bar.
French & Double Doors
Double doors are beautiful and they leak. The center seam, the active leaf, the inactive leaf, the astragal: every joint is a potential water intrusion point when an Everglades storm cell drives rain at 50 mph. On the Ridge, where those afternoon storms hit the limestone elevation first, we install French and double door systems with interlocking astragals, full-perimeter weatherstripping, and sill pans flashed into the rough opening. We also pull the old door and inspect the sub-sill for rot before anything new goes in. That’s the step that separates a ten-year door from a two-year door.
Replacement Doors
Most replacement door projects in Pine Island Ridge aren’t just swapping a slab. They’re correcting 40 years of deferred maintenance: corroded aluminum thresholds, termite-chewed jamb legs, missing flashing behind the stucco return. We price the replacement honestly by inspecting the opening first, writing a line-item quote that names every step, and putting the allowance terms in the contract before the first screw comes out. No surprise change orders. No stalled inspections. If we open the wall and find something nobody could see from the outside, we price it in writing and you approve it before we proceed. That’s how we’ve done Door Installation since 2011.
Storm & Exterior Doors
A storm door on the Ridge has to fight UV that eats aluminum frames, humidity that swells wood cores, and wind that flexes everything. We install ViewLux and CGI storm-rated exterior doors that stand up to the exposure, and we set them in frames flashed for the specific wind load your home’s position on the ridge creates. The old aluminum storm door that’s been rattling since the 80s won’t cut it anymore, not when your insurance premium depends on the wind-mitigation inspection.
Whether you need a full impact-rated entry system or a properly flashed replacement for the door your dog chewed through, call (844) 901-4551 and we’ll set up a free in-home measure. The quote is written, itemized, and good for 30 days.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pine Island Ridge
We’re an authorized installer for eight brands, and on the Ridge the three that matter most are PGT, CGI, and Therma-Tru. PGT and CGI build impact doors with Miami-Dade NOAs that satisfy Broward County’s HVHZ inspectors without friction. Therma-Tru builds the fiberglass entry systems your neighbors see us carrying up SW 10th Street on any given week. We stock common parts and hardware for these lines locally, so when your older PGT door needs a roller or a threshold, you’re not waiting three weeks for a part to ship from Ohio. Call (844) 901-4551, tell us the brand, and we’ll tell you what we can do and when.
Common Door Installation Problems We See in Pine Island Ridge Homes
- Non-HVHZ impact doors that fail Broward County inspection. A crew that normally works Palm Beach County brings a “Florida-approved” impact door that isn’t Miami-Dade NOA listed for large-missile. Broward’s inspector runs the number, it doesn’t pass, and the whole project stalls. We only install products that meet HVHZ large-missile standards, so the inspection is a formality.
- Rot and termite damage hiding in the rough opening. The 1975–1990 CBS homes on the Ridge have wood jamb legs and sub-sills that have been absorbing Everglades humidity for decades. Pull the old aluminum door and you often find the framing is compromised. We open the wall, assess it, and price any reframing before we install. You know the number before we start.
- Failing stucco-return jambs without flashing. The original doors were set directly into stucco returns without sill pans or proper flashing. When we install a new door, we cut the return, install flashing, and seal the opening so wind-driven rain can’t wick into the jamb. Skip this and the new door fails in three years.
- Shifted rough openings from limestone settlement. Pine Island Ridge sits on limestone, and limestone moves. After 40 years, the rough opening that was square in 1982 isn’t square anymore. We measure for it, shim and reframe as needed, and hang the door so it closes true. A door that’s out of square by half an inch is a door that leaks.
Pricing for Door Installation in Pine Island Ridge, FL
A standard replacement entry door in Pine Island Ridge runs $1,100–$2,400 installed, depending on size and whether the existing jamb can be reused. A hurricane-proof front entry door with an impact-rated slab and HVHZ-compliant framing typically runs $2,800–$6,500, with larger double-door or French configurations on the upper end. Exterior storm doors typically run $800–$1,800. The biggest price movers on the Ridge are the rough-opening condition (stucco-return reframing adds $400–$900 per opening), the wind-load design pressure required for your specific location on the ridge, and whether the product needs a custom size to fit an older opening. Every quote is free, written, and itemized. You’ll see the full number before you sign anything. Call (844) 901-4551 to schedule a free in-home measure.
What Door Installation Costs in Pine Island Ridge
Here’s the honest breakdown for the Ridge’s market. Impact-rated single entry doors: $2,800–$6,500 installed, framing included. Standard replacement entry doors: $1,100–$2,400. French and double doors with impact glass: $4,500–$8,000 and up, depending on width and configuration. Whole-home door packages (front entry plus patio sliders plus side and garage entries) run $8,000–$25,000 when you’re doing a full retrofit. The variables that move your number: the floor height (second-story openings on the few two-story sections need higher design pressure), the opening count, the condition of the existing framing, and whether your home’s specific wind zone on the limestone ridge requires a higher DP rating. We do not charge for the measure and we do not pad the quote. What we write is what you pay. Call (844) 901-4551 for a free in-home measure and a written, itemized quote.
Florida Pays You Back
Pine Island Ridge homeowners have access to real money for impact door and window work. My Safe Florida Home matching grants can offset up to $10,000 in qualifying wind-mitigation upgrades for homeowners who meet the program’s criteria. Florida’s sales-tax exemption applies to impact-resistant windows and doors, so the tax line on your quote disappears entirely. The federal 25C energy credit returns 30% of product cost on qualifying units, up to $600 per year. And after a wind-mitigation inspection ($75–$150), most Ridge homeowners see windstorm-premium credits averaging around 25% on the windstorm portion of their policy. Programs and carriers set the final numbers on all of this. We’ll point you to the right paperwork and help you document the installation so you can claim what you qualify for. That’s part of the job.
One comparison worth making: impact doors versus hanging shutters on the same opening. A shutter does nothing until you’re already in the storm; an impact door is protecting the house permanently, with no panels to install at 11 p.m. before a watch goes up. If you’re going to spend the money either way, the door is the one that pays you back through the insurance credit.
We Also Serve Cities Near Pine Island Ridge
Our crews cover all of Pine Island Ridge and the surrounding communities, including Cooper City, Davie, Southwest Ranches, and Pembroke Pines. If you’re in one of those cities and need Door Installation in Pine Island Ridge quality work, the same crew, the same pricing, and the same permitting discipline apply. Dispatch and scheduling are coordinated from our Miami (South FL) office, but our crews serve Pine Island Ridge locally.
Serving Pine Island Ridge, FL — Our Local Coverage Area
We’re based in the Pine Island Ridge area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Door Installation in Pine Island Ridge
Because Pine Island Ridge sits inside Broward County’s High-Velocity Hurricane Zone, and the Florida Building Code requires every exterior door replacement to carry a permit with a Florida Product Approval number that meets HVHZ standards. The inspector verifies that number against the product’s Miami-Dade NOA before signing off. Contractors who skip the permit or bring a non-HVHZ product will fail inspection, and you’ll be stuck with a door that isn’t permitted, isn’t insurable, and has to be redone. We pull the permit, we schedule the inspection, and we stand there while the inspector runs the number. Call (844) 901-4551 if you’re not sure whether your existing door is permitted. We’ll check the records.
Opening a 1975–1990 CBS wall on the Ridge triggers a chain of code requirements: the new door must meet current HVHZ design pressures, the rough opening must be reframed to current standards if the original framing is undersized or compromised, and the flashing and water-resistive barrier must be brought to current code. If the electrical runs through the wall near the opening, the exposed wiring may need to be brought up to code as well. We identify all of this in the first inspection, write it into the line-item quote, and tell you what’s mandatory versus what’s optional. No surprises after the drywall comes off. Call (844) 901-4551 and we’ll walk through the scope before we ever open a wall.
Almost never on the Ridge. The original aluminum sliding door frames from 1975–1990 were not designed for the weight or design-pressure requirements of today’s impact-rated panels. Reusing the old frame means the new impact panel is only as strong as the frame holding it, and a Broward County inspector will not sign off on a retrofit that doesn’t meet the full assembly’s HVHZ rating. We recently replaced a corroded 1980s aluminum sliding door on SW 10th Street with a Therma-Tru fiberglass impact-rated unit. The original rough opening had shifted inside the stucco return, so our crew reframed the jamb to meet HVHZ design pressure, and the homeowner’s wind mitigation inspection passed on the first visit. That’s the standard outcome when the frame is done right. Your old frame stays in the scrap pile where it belongs.
We schedule free in-home measures across Pine Island Ridge every week, and our crews are based close enough that a same-week appointment is standard for the 33328. Call (844) 901-4551, tell us what door you’re looking at, and we’ll give you a specific day and time. A live person answers the phone, 24/7. No call center. No waiting three days for a callback.
The product prices are the same as Cooper City or Davie, but Pine Island Ridge’s older housing stock and limestone-ridge settlement patterns mean we sometimes see more reframing and flashing work in the rough-opening stage than in newer neighborhoods. That can add $400–$900 per opening compared to a house built after 2000. What you’re paying for is doing it right: HVHZ permit, proper flashing, a jamb that’s squared and sealed, and an inspection that passes the first time. You’ll see every line item before you sign. Call (844) 901-4551 for a free written estimate. 10% off for seniors and veterans. $40 off any repair over $200. Permanent offers, not promotions.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Pine Island Ridge with permitted, HVHZ-compliant door installation since 2011.