Free in-home measure and quote — PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterFast, Reliable Custom & Geometric Windows Across Westgate
Custom and geometric windows in Westgate run anywhere from $800 for a modest impact-rated fixed unit to $5,000 or more for a large arched or curved opening that needs CBS reframing. Most Westgate homes we quote fall in the $1,200–$3,400 per window range once you factor in Palm Beach County permitting, wind-mitigation paperwork, and the structural work older concrete block walls usually require. If you live in Westgate, your home almost certainly has windows that were never designed for Florida’s wind-borne debris code, and that changes everything about what a quote should include. Call (844) 901-4551 and we’ll walk you through what your specific openings actually need.
Key Takeaways
- Westgate is unincorporated Palm Beach County, so every custom window replacement must meet wind-borne debris requirements: impact glazing or approved shutters, no exceptions.
- Jalousie and single-pane aluminum windows still dominate the 1950s–1970s CBS housing stock here, and insurers are forcing that replacement wave.
- Septic and well setback distances on open-acreage lots can add structural review time before a permit gets issued for large custom glass.
- Free in-home measure, written line-item quote, and no trip charge inside our home county.
What Custom & Geometric Windows Costs in Westgate
Let’s put real numbers on it. A standard impact-rated custom window in Westgate, installed with county permit, typically lands between $800 and $1,500 per unit. Impact single-hung windows climb to $900–$1,800 depending on size and design pressure. Large or custom openings – say a picture window with a radius top on a gable wall or an oversized slider reworked into a fixed geometric centerpiece – routinely run $2,500 to $5,000 once reframing and structural strapping are included. Whole-home packages across a three-bedroom Westgate CBS home generally land between $8,000 and $25,000 or more, driven by opening count, second-story access, and whether the rough openings need to be squared and resized.
What moves the price in Westgate specifically: wind zone requirements and exposure category matter more here than ten miles inland. County inspectors check design pressures against your opening dimensions and wall height, so a large eastern-facing custom window on a one-story home off Drexel Road gets calculated differently than the same unit on an interior wall. Frame material matters too – aluminum impact-rated frames handle the coastal salt air better than vinyl long-term, but they cost more up front. We’ll give you a written line-item quote after a free in-home measure, so you see exactly where the money goes before you sign anything.
Florida Pays You Back
Westgate homeowners have three ways to offset the cost of custom impact windows, and they stack. The My Safe Florida Home program offers matching grants up to $10,000 for qualifying wind-mitigation upgrades on your primary residence. Florida’s sales-tax exemption applies to impact-resistant windows and doors, which trims roughly 6% off the ticket. The federal 25C energy credit returns 30% of product cost, up to $600 per year, on qualifying energy-efficient units. After installation, a wind mitigation inspection (typically $75–$150) documents your opening protection for your insurer – Westgate homeowners we work with commonly see windstorm premium credits averaging around 25% on the windstorm portion of their policy. Final numbers always come from your carrier and the program administrator, never from us. We’ll prepare the documentation so the credits actually process.
Why Winslow Windows & Doors Is Westgate’s Preferred Custom & Geometric Windows Company
Ed Winslow started this business in 2011 and put his name on the door, and that changes how a crew behaves on a Westgate job site. We do not hand you a ticket number and disappear into a corporate call center. When you call (844) 901-4551, a live person answers – at 2 a.m., on a Sunday, whenever. The same is true every day after the install.
Our technicians are background-checked and uniformed, so when they arrive at your home near Congress Avenue or off Haverhill Road, you know exactly who is walking up your driveway. Westgate homeowners have written us reviews that mention the same two things repeatedly: the quote matched the final invoice, and the crew left the site cleaner than they found it. That is the standard, not the exception.
Because Westgate sits in unincorporated Palm Beach County, our team knows the county’s permitting workflow cold. We pull permits, handle wind-borne debris documentation, and schedule inspections including the final county sign-off. When a custom opening fails inspection here, it’s almost always missed reframing or under-glazed design pressure on a large unit. We scope for that before quoting, not after the county flags it.
Our local knowledge runs deep enough to matter. We’ve quoted Custom & Geometric Windows on CBS homes from Lantana Road up to the Okeechobee corridor, and we know which 1950s and 1960s rough openings tend to hide corroded steel frames behind drywall. That’s what keeps a quote honest in Westgate.
Our Custom & Geometric Windows Services in Westgate
Custom Impact Windows
In Westgate, impact-rated glazing isn’t a premium upgrade, it’s what Palm Beach County code requires for any new or replacement window. We size laminated-glass units to your exact rough opening, match the design pressure to your wall height and exposure, and install them with the structural strapping the county inspector will check. Most custom impact windows in Westgate range from $800 to $1,500 per unit installed, permit included in the line item.
Arched & Curved Windows
True arched windows – semicircular or radius-topped units – require careful templating, especially on Westgate’s older CBS walls, which were not framed with modern opening tolerances in mind. We measure each curved opening on site, fabricate through our authorized PGT or CGI lines, and handle the reframing so the arch seats correctly against structural block. A true arched unit on a 1960s Westgate home runs $2,500–$5,000 depending on span and whether we are converting an existing rectangular opening or replacing a failed arch insert.
Oversized Openings
Westgate has a mix of modest CBS homes and larger open-acreage parcels where owners build detached shops, ADUs, or screen enclosures with big glass. Oversized custom windows on those structures carry a specific risk: if wind calcs do not account for the exposure of a detached outbuilding, the glass can be under-glazed for design pressure. We run those calcs as part of every quote and will not under-spec a unit to save a few hundred dollars. Oversized custom openings in Westgate typically start around $2,500 and climb with glass area and frame reinforcement.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Westgate
We are authorized installers for CGI, CWS, ES Windows, and other premium brands, which matters in Westgate because impact products need documentation, not just product. Miami-Dade NOA and Florida Product Approval numbers are per configuration, and we pull the right approvals for your specific opening size, wall height, and exposure category. When a Westgate homeowner needs a service part or a warranty claim processed on a custom unit, we can usually source it faster than a contractor who does not stock local parts or carry those brand authorizations. Our standing parts inventory for coastal South Florida helps keep turnaround tight on service calls for existing impact windows.
Common Custom & Geometric Windows Problems We See in Westgate Homes
- Corroded steel-frame jalousies from the 1950s and 1960s. The salt-laden air that drifts inland from the Atlantic, about 8–10 miles east of Westgate, eats these frames from the inside. Homeowners only discover the extent when we pull the unit and find the jamb itself has to be reframed.
- CBS rough openings that were never square. Most Westgate homes built between the early 1950s and mid-1970s have concrete block openings sized for old aluminum windows, not modern impact units. Skipping reframing leads to broken jambs, air leaks, and failed county inspections.
- Arched windows installed without HVHZ-compliant impact framing. We see patchwork installs on older detached structures, and they fail the county’s wind-borne debris inspection almost every time until the framing is brought up to code.
- Under-glazed oversized units on outbuildings and shops. A big window on an exposed west-facing wall of a detached ADU can be under-spec for design pressure if the original calc assumed a sheltered main-house condition.
Permitting, Setbacks, and What Actually Changes the Price in Westgate
Westgate is unincorporated Palm Beach County, and every custom or geometric window replacement on every structure – main house, detached garage, shop, ADU – falls under county jurisdiction and the Florida Building Code’s wind-borne debris region requirements. That means impact-rated glazing or a code-compliant shutter system is legally required, not optional. No city inspector, no variances because the structure is old.
On acreage parcels, septic and well setbacks interact with window permits in ways a homeowner would not expect. County plans reviewers use the survey to confirm that a proposed oversized window does not encroach on required separation from a drain field or well head. If your shop or ADU sits within a setback that limits structural changes on that wall, the permit path changes – sometimes a full structural review kicks in, and that adds design time before you get to the install. We scope this before quoting, because we would rather catch it in the estimate than hand you a change order later.
Long material hauls and equipment access matter in the unincorporated parts of the county. Roads and driveway conditions on larger Westgate lots can require our crew to stage materials differently than on a tight in-city street. If your home sits at the back of a long easement off a two-lane road, we account for that in the quote – delivery timing, panel cart access, protection for landscaping along the path.
Custom & Geometric Windows in Westgate work also means understanding grading and drainage on an open lot. A large fixed window near grade on the windward side of a detached building needs more than a pretty frame; the surrounding grade and drainage determine whether water pools against the sill and how much kick-flashing and pan the install requires. We walk the site, look at how water moves on the lot, and quote accordingly.
A Westgate Install We Won’t Forget
On a 1962 CBS home off Drexel Road, our crew pulled out a fully corroded steel-frame jalousie unit and reframed the opening to accept a PGT custom arched casement window with laminated glass interlayer and Miami-Dade NOA. The homeowner needed the wind mitigation credits to keep their insurance policy, and the new sashes sealed the room against the humid, salt-laden air that had rotted the old jamb. That job changed the entire feel of the living room – and it kept a policy alive that the carrier was poised to cancel. That’s the everyday reality of window work in Westgate.
We Also Serve Cities Near Westgate
Winslow Windows & Doors serves all the surrounding communities, including Miami, Hialeah, Coral Gables, and Miami Shores. Dispatch and scheduling are coordinated from our Miami office, but the crews that work Westgate live and work in this part of South Florida. If you are just outside the unincorporated county line, call us and we’ll let you know if you’re in our home county trip-charge waiver zone. Our Done Right Promise covers every job we touch.
Serving Westgate, FL — Our Local Coverage Area
We’re based in the Westgate area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Custom & Geometric Windows in Westgate
Yes, you need impact-rated or otherwise code-compliant protected openings on any habitable or enclosed structure, including detached shops and ADUs, because Westgate falls under Palm Beach County’s wind-borne debris region and county inspectors review all permitted openings the same way. The same Florida Building Code requirement applies to the main house. If your structure houses people, tools, or equipment worth protecting, plan for impact glass on every new window. Call (844) 901-4551 and we’ll tell you exactly what your structure requires.
Setback distances from septic drain fields and wells can trigger additional plans-review scrutiny on larger custom windows, and in some cases the county requires a structural review before the permit issues. This is specific to unincorporated acreage lots – city homes on sewer and municipal water rarely hit this. We check your survey against county setback rules during the quoting process so the permit path is clear before you commit. Call (844) 901-4551 for a free site review.
Yes, converting jalousie or single-pane aluminum windows to impact-rated custom units is exactly the type of upgrade a wind mitigation inspection documents for insurance credits. The key is that the installation must be done to code with proper structural attachment, because the inspector verifies the opening protection method, not just the glass. Westgate homeowners we work with commonly see windstorm premium reductions averaging around 25% on the windstorm portion after a passing inspection. We prepare the documentation your carrier needs. Call (844) 901-4551 to start your project.
We fabricate true arched and curved units, not just square windows with decorative arch inserts, and we template every curved opening on site because Westgate’s older CBS rough openings were rarely built to modern tolerances. Both PGT and CGI produce true radius configurations with impact-rated laminated glass and Miami-Dade NOA documentation. A true arch costs more than an inset arch because the frame, glass, and supporting structure are all curved. Call (844) 901-4551 for an in-home measure and a real quote.
Plan to schedule your free in-home measure at least 6–8 weeks before you want the units installed, because custom fabrication runs 4–6 weeks once we place the order and hurricane-season demand pushes lead times to the long end. Once your units arrive, installation on a standard Westgate CBS home is often completed in as fast as a single day. We pull permits early so county inspection slots do not delay the final sign-off. Call (844) 901-4551 now to get in the queue before the next storm pressure hits South Florida.
Get Your Free Westgate Custom Window Estimate
Ed Winslow’s name is on the door and on every window we install in Westgate. Our Done Right Promise means if it’s not done right, we make it right – for a century, not five years. Upfront pricing, written line-item quotes, no trip charge inside our home county, a permanent 10% discount for seniors and veterans, and $40 off any repair over $200. Call (844) 901-4551 today and talk to a real person who knows Westgate window jobs from the inside out. The one down the road.
Written by Ed Winslow, Owner at Winslow Windows & Doors.