Free in-home measure and quote — PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterFast, Reliable Custom & Geometric Windows Across Pinewood
Custom and geometric windows in Pinewood, FL run $800–$1,500 per opening for impact-rated units, with large radius or arched configurations landing between $2,500 and $5,000. Miami-Dade County’s HVHZ code changes what can legally go into a 1960s concrete-block home here, so the real question isn’t just cost. It’s whether the unit carries a Miami-Dade NOA. Winslow Windows & Doors has been navigating those county-specific rules since 2011, and our crews know the jalousie tear-outs, CBS jambs, and permit triggers on Pinewood’s mid-century housing stock better than any faceless chain. We also handle Roof Replacement & Installation in Pinewood when the full structure needs protection. Call (844) 901-4551 and a live person answers, day or night.
Key Takeaways
- Pinewood sits inside Miami-Dade County, so every permitted custom window replacement must carry a Miami-Dade Notice of Acceptance (NOA), not just Florida Product Approval.
- Original 1950s–1970s jalousie and single-pane aluminum windows still common in Pinewood cannot be retrofitted for impact compliance. A permit almost always triggers a full system replacement.
- Custom impact windows in Pinewood typically run $800–$1,500 per opening; curved, arched, and oversized work runs $2,500–$5,000.
- Ed Winslow owns the company, and the Done Right Promise means if it isn’t done right, we make it right. Permanently.
- Free in-home measure and written quote. No trip charge inside the county.
Why Winslow Windows & Doors Is Pinewood’s Preferred Custom & Geometric Windows Company
Pinewood homeowners call us because we sit down with the actual code requirements before anyone cuts an opening. Most of the homes along NW 103rd Street and the side streets running up to Opa-locka Boulevard are slab-on-grade concrete-block ranchers built between 1950 and 1975. Those homes carry window openings sized for jalousie louvered sashes, not modern impact units. When a homeowner pulls a permit to fix a leaking sash or replace fogged glass, Miami-Dade’s HVHZ code doesn’t allow a patch. The jalousie comes out, the opening gets reframed or re-anchored, and a fully NOA-certified Custom & Geometric Windows unit goes in. We know that because we’ve done it on Pinewood streets more times than we can count.
Ed Winslow’s name is on the door, and on every job we do. That’s not marketing filler. It’s the reason we publish our address and license number, answer the phone with a live person 24 hours a day, and send background-checked, uniformed technicians to every Pinewood home. Homeowners in this neighborhood have been burned by vague estimates and no-show crews. We hand you a written line-item quote with fixed pricing, and if something isn’t right, the Done Right Promise kicks in. A lasting accountability standard. No national chain will match that, and no brokered contractor in Pinewood can say the same.
We’re the one down the road. Dispatch and scheduling for Pinewood jobs run through our South Florida office, but the crews work this neighborhood weekly. When a summer storm cracks a seal or a louvered window starts rattling on NW 91st Street, Pinewood isn’t a satellite market for us. It’s where our trucks already are.
Our Custom & Geometric Windows Services in Pinewood
Miami-Dade County has its own product-approval standard, the Miami-Dade Notice of Acceptance, or NOA. It’s stricter than the baseline Florida Building Code, and it’s mandatory on every permitted window or door replacement in Pinewood. That single fact drives everything we install in this neighborhood. Here are the four service areas where Pinewood homeowners call us most.
Custom Impact Windows
A custom impact window in Pinewood must pass HVHZ large-missile impact testing specific to Miami-Dade County. Not Broward. Not Palm Beach. A generic Florida Product Approval alone won’t satisfy a Pinewood inspector. Our custom impact units come with the county-specific NOA documentation matched to the opening, the design pressure rating, and the wind zone. We file that NOA record with the county so the wind mitigation credit stays on your insurance policy. No paperwork left for you to chase.
Geometric & Shaped Windows
Pinewood’s mid-century homes have rectangular openings, for the most part. So when a homeowner wants a trapezoid, hexagon, or angled gable window, the rough opening almost always has to be modified. On CBS construction that means cutting concrete block, installing a new lintel where needed, and re-anchoring the jamb. We handle that full scope in-house, with an engineer-reviewed plan that matches Miami-Dade’s HVHZ requirements. The old mill-finish aluminum frames from 1962 don’t get reused. They’re structurally done.
Arched & Curved Windows
Arched and curved units in Pinewood carry one extra burden. The radius glass, the laminated interlayer, the frame geometry, all of it has to be tested as a complete assembly for Miami-Dade NOA compliance. You can’t just order a radius sash from an online catalog and assume it’s legal here. We order directly from authorized fabricators like PGT, CGI, and ES Windows, with the NOA number tied to the exact configuration. On a 1962 concrete-block rancher off NW 103rd Street, we tore out a rusted jalousie bay and replaced it with a PGT custom radius impact window carrying Miami-Dade NOA 21-0123, part of our Shingle, Tile & Metal Roofing in Pinewood scope when the full envelope needs upgrading. The homeowner had pulled a permit to fix a leaking sash, and the code forced the full tear-out. Our crew set the new unit into the original CBS opening with fresh jamb anchors, then filed the NOA record with the county. That’s how it has to work in Pinewood.
Oversized Openings
Oversized openings in Pinewood’s slab-on-grade homes need more than a bigger sash. They need larger headers, reinforced jamb anchors, and often a stronger lintel over the opening, because the CBS block above carries real structural load. Then the unit itself has to meet a higher design pressure rating than a standard window, because a larger glass surface catches more wind. We size the unit to the opening and the wind zone, never the other way around. The moment a contractor tries to save money by under-specifying a big opening, the first hurricane season flexes the frame and cracks the seal. We don’t do that.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pinewood
We’re authorized installers for CGI, ES Windows, and ECO Window Systems, among others. That matters in Pinewood because these fabricators build to Miami-Dade NOA specs as a default, not an upgrade. Our relationship with them means we can order custom radius and geometric configurations with county-specific documentation already attached. For Pinewood customers, that shortens the time between permit approval and installation, and it means the unit that shows up actually passes inspection. Custom fabrication generally runs 4–6 weeks once we place the order. After that, installation can be completed in as fast as a single day.
Common Custom & Geometric Windows Problems We See in Pinewood Homes
- Jalousie windows that can’t be saved. The louvered glass-slat style was standard on 1960s Miami-Dade construction, and it’s still common throughout Pinewood. Jalousies cannot be retrofitted to meet hurricane-impact ratings. The moment a permit is pulled, Miami-Dade code forces a full tear-out and replacement with an NOA-certified unit. Contractors in Pinewood almost never do patch jobs on these.
- Florida Product Approval that isn’t enough. A homeowner finds a nice arched window online, sees the Florida Product Approval stamp, and assumes it’s legal. Then the Pinewood inspector rejects it because the unit lacks a Miami-Dade NOA for HVHZ large-missile impact. We see this at least once a season. It throws the permit back to square one and costs the homeowner weeks.
- Corroded original jambs reused on new installs. Some contractors try to save money by keeping the original 1960s mill-finish aluminum jamb and trim. But in Pinewood’s humidity and salt air, that material has corroded enough that the new impact sash won’t seat properly. The first heavy summer storm drives water through the weep holes and into the wall. We always replace the jamb and trim as part of the job.
- Undersized design pressure on oversized openings. A custom oversized opening gets a cheap single-pane insulated glass unit with a low design pressure rating. The first hurricane season’s wind load flexes the frame, cracks the seal, and voids the warranty right before an insurance claim. A $3,000 shortcut becomes a $5,000 replacement.
Pricing for Custom & Geometric Windows in Pinewood, FL
A standard custom impact window in Pinewood runs $800–$1,500 per opening, installed. Custom shaped work like radius, arched, trapezoid, or hex units lands between $2,500 and $5,000 per opening, because the frame fabrication, glass cutting, and structural work are all unique. Whole-home packages on Pinewood’s typical 3-bedroom CBS rancher start around $8,000 and go up from there depending on opening count, wind zone, floor height, and frame material. We give a free in-home measure and a written line-item quote, so the number you see is the number you pay. No change orders, no surprise add-ons. Call (844) 901-4551 to schedule yours.
What Custom & Geometric Windows Costs in Pinewood
Here’s the honest breakdown. Impact windows generally run $800–$1,500 per window installed in Pinewood’s market. Impact single-hung units run $900–$1,800. Large or custom geometric openings run $2,500–$5,000. Whole-home packages run $8,000–$25,000 or more, depending on how many openings and what shape they are. What moves the price in Pinewood specifically: opening count, the wind zone your street sits in, whether the unit is on a ground floor or elevated, and whether you want vinyl, aluminum, or a hybrid frame. A single arched window on NW 81st Street priced at $3,200 from us includes the NOA documentation, the permit filing, the jamb replacement, and the installation. A $2,400 quote from an out-of-county installer often leaves all of that out. Free in-home measure and written quote, no trip charge inside the county. Call (844) 901-4551.
Florida Pays You Back
The incentives stack, and Pinewood homeowners should know exactly what’s available. The My Safe Florida Home program offers matching grants up to $10,000 for qualifying wind-mitigation upgrades, including impact windows and doors. Florida also exempts impact-resistant windows and doors from sales tax. On the federal side, the 25C energy credit covers 30% of the product cost, up to $600 per year, on qualifying energy-efficient units. And after a wind-mitigation inspection runs $75–$150, windstorm-premium credits average roughly 25% off the windstorm portion of your policy. We don’t control grant amounts, tax rules, or carrier decisions, and nothing here is a guarantee. But we do file the NOA record correctly so the credits you qualify for actually stick. A cheap install with missing paperwork voids all of that.
One more comparison worth making in Pinewood. Impact windows versus hurricane shutters. Shutters cost less upfront, but you’re still hanging panels at 2 a.m. while the storm rolls in, and the glass behind them isn’t protected until they’re up. Impact Windows — Pinewood are permanent. No panels to store, no track to maintain, no windborne debris getting through when you’re not home to deploy them. In Pinewood’s HVHZ zone, that difference matters every single season. And unlike a big-box retail install that contracts out the work to whoever’s available, a licensed impact specialist like us uses crews that pull the permit, pass the inspection, and stand behind the unit. There’s no ticket number. Just Ed Winslow’s name.
We Also Serve Cities Near Pinewood
If you’re in Westview, Opa-locka, Gladeview, or West Little River, our crews work those streets the same week they work Pinewood. Miami-Dade’s NOA and HVHZ rules apply across all of them, so if you’re shopping for Custom & Geometric Windows anywhere in this corner of the county, the same code path applies. Call (844) 901-4551 and we’ll schedule a free measure.
Serving Pinewood, FL — Our Local Coverage Area
We’re based in the Pinewood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Custom & Geometric Windows in Pinewood
Yes. Florida Product Approval is a statewide baseline. Miami-Dade County requires a separate Miami-Dade Notice of Acceptance (NOA) for every permitted window or door replacement in Pinewood, including custom-radius and geometric units. The NOA certifies the exact configuration passed HVHZ large-missile impact testing specific to this county. A unit with only Florida Product Approval will be rejected by a Pinewood inspector. Call (844) 901-4551 before you buy anything off a shelf, and we’ll tell you exactly which NOA applies to your opening.
No. Jalousie windows, the louvered glass-slat style standard in 1960s Pinewood construction, cannot be retrofitted for impact compliance. Miami-Dade code treats a permit on a jalousie as a full system replacement. The entire opening gets torn out, the jambs are replaced, and an NOA-certified impact unit goes in. You cannot convert the existing louvered frame. Call (844) 901-4551 for an exact quote on what your specific jalousie replacement will cost.
Custom-shaped windows in Pinewood need a design pressure rating matched to the specific opening size, floor height, and wind zone, as dictated by Miami-Dade HVHZ code. We never spec a unit above +/-100, but the exact number comes from the engineering calc for your wall. The rating matters for insurance because your wind-mitigation credits and future storm claims depend on documented NOA compliance. A unit with a low DP rating that fails during a storm can void the warranty and complicate the claim. We file the NOA record with the county so the paperwork is already in place when your insurer asks for it. Call (844) 901-4551 and we’ll walk you through the calc for your home.
Not automatically. ES Windows and ECO Window Systems both fabricate configurations that carry Miami-Dade NOA listings, and we’re authorized installers for both. But the NOA applies to specific tested configurations, glass types, and frame sizes. You cannot assume every catalog item carries the Pinewood-required NOA for your exact opening. We verify the NOA against the configuration before we order, so the unit that arrives is legal the day it ships. That’s the kind of check a cheap quote leaves out. Call (844) 901-4551 and we’ll confirm the NOA for your specific window.
Permitting for a custom impact window replacement in Pinewood typically takes one to three weeks once the full application is submitted. Miami-Dade County needs the NOA documentation for the exact unit being installed, the design pressure calculations, and the contractor’s license and insurance. We pull the permit ourselves, file everything in the right order, and coordinate the inspection. You don’t stand in line at the building department. Custom fabrication runs 4–6 weeks after the permit clears, and installation can be done in as fast as a single day once the units arrive. Call (844) 901-4551 to start your permit file this week.
No. We give written line-item quotes with fixed pricing before any work begins. If the scope doesn’t change, the invoice matches the quote. That’s what Ed Winslow’s name on the door buys you. If something in the wall is worse than expected once we open it up, we stop, show you, and re-quote before proceeding. No change orders slipped in at the end. Call (844) 901-4551 and schedule a free in-home measure to get your number in writing.
Done Right, or We Come Back
Every window we install in Pinewood carries the Done Right Promise. If it’s not done right, we make it right. That’s a standard of accountability written into every job. We’re locally owned, Ed Winslow publishes the address and license number, and a live person answers the phone 24/7. No call centers, no voicemail loops, no ticket numbers.
Call (844) 901-4551 to schedule your free in-home measure and written quote for Custom & Geometric Windows in Pinewood. A neighbor you can call at 2 a.m. and someone will actually answer.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Pinewood since 2011.