Free in-home measure and quote — PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterFast, Reliable Custom & Geometric Windows Across Palm Springs
Custom and geometric windows in Palm Springs, FL usually mean one thing: retrofitting a 1950s or 1960s CBS ranch home with impact-rated glass that actually fits the existing masonry opening. Most of these houses were built around jalousie and louvered aluminum frames that no longer meet Palm Beach County’s wind-borne debris code, and the openings are rarely square or standard-sized. That’s the work we do most weeks here. If you live in the 33406 zip and you’re tired of rattling louvers, fogged glass, or a round window that leaks during afternoon thunderstorms, call Winslow Windows & Doors at (844) 901-4551 for a free in-home measure and written quote.
Key takeaways for Palm Springs homeowners:
- Every custom or geometric window project here is a retrofit into existing CBS masonry, not new construction framing.
- Impact-rated glazing or approved shutters are required on any permitted replacement under the Florida Building Code.
- Non-standard vintage openings almost always require buck framing, custom-order sizing, or masonry modification.
- Winslow has installed custom impact glass on ranch homes throughout Palm Springs since 2011, and a live person answers our phone 24/7.
Why Winslow Windows & Doors Is Palm Springs’s Preferred Custom & Geometric Windows Company
Ed Winslow’s name is on the door, and on every job we do. We’re not a big-box installer with a ticket number and a rotating crew. We’re a locally owned, owner-operated windows, doors, and roofing company that has been serving South Florida since 2011, with a published address and license number. When a Palm Springs homeowner calls us about a half-moon window over the front door or a full-wall geometric bay, the person answering already knows this village’s housing stock. We know Congress Avenue. We know the ranch streets north of Lake Worth Road and south of Forest Hill Boulevard. We know what a 1959 CBS jamb looks like when you pull the jalousie frame out.
Palm Springs customers consistently tell us the same thing: the estimate was specific, the crew showed up when promised, and the window actually fit the hole. That’s not luck. That’s our Custom & Geometric Windows team measuring twice and ordering once, because we know a re-order in Palm Springs means another 4 to 6 weeks of fabrication delay on a custom unit. We’re the one down the road, and that matters when a storm is two days out and your arched picture window still isn’t sealed right.
Our Custom & Geometric Windows Services in Palm Springs
Custom Impact Windows
In Palm Springs, custom impact windows are not a luxury upgrade. They’re what the code requires the moment you pull a permit. We order PGT, CGI, and CWS custom units sized to your existing masonry openings, with laminated glass designed for Palm Beach County’s wind-borne debris zone. No standard big-box slider is going to fit a 52-inch vintage opening without a fight. We’d rather order the right size the first time.
Geometric & Shaped Windows
Triangle, trapezoid, pentagon, and radius-top windows are common in Palm Springs ranches, especially above entry doors and on front elevations. The problem is that these units carry the same impact requirements as every other opening, and they almost never match a stock size. We fabricate extension jambs and specify the correct design pressure for each shape, so the county approves the permit and the glass doesn’t flex in a storm.
Arched & Curved Windows
Arched openings look great on a 1960s ranch until the aluminum frame corrodes through in the salt air. We replace them with impact-rated arched units that hold true to the original radius. In older Palm Springs homes, the rough opening has often settled out of square, so we re-shim and deepen the buck frame before the sash goes in. A heavy curved unit that binds under its own weight will crack eventually. We set it right the first time.
Oversized Openings
Full-wall geometric bays and oversized picture windows are statement pieces on mid-century houses in Palm Springs. They also carry the most wind load on the wall. We plan oversized jobs with the structural requirements in mind: header condition, masonry depth, design pressure rating, and how the unit gets from the truck to the opening without damage. If the opening is 12 feet wide, the glass package has to be specified for that span, not pulled off a rack.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Palm Springs
Winslow is an authorized installer for PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. For Palm Springs custom and geometric work, we most often specify PGT for impact ranch conversions, ES Windows for clean mid-century sightlines, and CWS when the opening is oversized and the design pressure is high. Having those relationships means we can get accurate fabrication lead times and stand behind the glass when it arrives. The Done Right Promise applies here: if it’s not done right, we make it right, period.
Common Custom & Geometric Windows Problems We See in Palm Springs Homes
- Jalousie glass that fails the permit the minute you pull it. The louvered panels from the 1950s and 60s provide almost no hurricane protection and don’t meet current FBC requirements. Converting them to impact geometric units is the signature job type in the village of Palm Springs.
- Vintage jambs that vary by up to an inch per side. Even on the same wall, a 60-year-old CBS opening can be 1/2-inch out of square top to bottom. Standard replacement frames won’t sit level, and forcing them means binding sashes and cracked glass later.
- Non-impact custom glass specified by mistake. Every geometric or arched unit in Palm Springs’s wind zone must carry HVHZ approval or the county rejects the permit. A pretty half-round window that doesn’t meet design pressure requirements is a wasted order.
- Oxidized aluminum frames from coastal humidity. Year-round salt air and intense UV accelerate seal degradation on original aluminum products still common here. We regularly see failed seals and corroded frames on homes where the glass itself is still fine.
Pricing for Custom & Geometric Windows in Palm Springs, FL
A jalousie-to-impact conversion on a standard Palm Springs ranch window typically runs $1,200 to $1,800 per opening installed. Custom geometric shapes like triangles, trapezoids, and half-rounds generally land between $1,500 and $3,500 per unit because they’re fabricated to order and often need extension jambs. Oversized or multi-panel geometric bays start around $4,000 and can reach $6,500 or more depending on span, glass package, and masonry condition. Whole-home custom packages in the village commonly run $12,000 to $30,000. What moves the number most in Palm Springs is the opening count, how far out of square the existing CBS jambs are, and the design pressure rating required for that wall’s height and exposure. Call (844) 901-4551 and we’ll schedule a free in-home measure and give you a written line-item quote, no vague ranges and no change orders later.
What Custom & Geometric Windows Costs in Palm Springs
Let’s give you real numbers for the Palm Springs market. Impact windows generally run $800 to $1,500 per window installed. A custom single-hung impact unit tends to land between $900 and $1,800. Large or custom geometric openings, the kind we see on front elevations and gable walls here, typically range from $2,500 to $5,000 each. Whole-home packages across a small 3-bedroom ranch usually start around $8,000 and can exceed $25,000 when you’re converting jalousies throughout, adding an oversized bay, and pulling permits on every opening.
What moves the price in Palm Springs specifically? First, the opening count and how many are non-standard vintage sizes. Second, your wind zone: every replacement here falls under Palm Beach County’s wind-borne debris requirements, so laminated impact glass is mandatory, not optional. Third, floor height and exposure: a second-story arched window on a gable end carries more design pressure than a ground-floor rectangular one. Fourth, frame material: aluminum is common and cost-efficient, while thermally broken aluminum or clad wood costs more. We’ll measure every opening, check the masonry condition, and hand you a written quote before any deposit. Free in-home measure, no trip charge inside the home county, and seniors and veterans always get 10% off.
Florida Pays You Back
Palm Springs homeowners have a real incentives stack available on custom impact glass. The My Safe Florida Home program offers matching grants up to $10,000 for qualifying wind-mitigation upgrades, which includes impact-rated windows and doors. Florida also exempts impact-resistant windows and doors from sales tax. On the federal side, the 25C energy credit covers 30% of product cost, up to $600 per year, on qualifying energy-efficient units. Then there’s the insurance side: after a wind-mitigation inspection, which typically runs $75 to $150 in Palm Beach County, many homeowners see windstorm-premium credits averaging around 25% on the windstorm portion of their policy. We don’t set those numbers, the programs and your carrier do, but we’ll help you understand what applies to your house.
One comparison worth making in Palm Springs: impact windows versus hurricane shutters. Shutters only protect the opening when someone is home to hang them, and they do nothing for daily energy loss, UV fading, or the jalousie louvers that rattle in every afternoon storm. Permanent impact glass protects 24/7, cuts cooling load, and qualifies for the same insurance credits, without panels stacked in the garage.
The Reality of Retrofitting Custom Windows in Palm Springs
In Palm Springs, FL, every permitted Custom & Geometric Windows project is a retrofit into existing CBS masonry openings. Unlike neighboring Palm Springs, where new construction means standard rough openings, this village is fully built out with post-WWII concrete block ranch homes. There is almost no new construction here. That means every job we scope on these tight residential streets involves non-standard vintage jamb dimensions that require buck framing, custom-order sizing, or masonry modification to accept modern impact-rated glazing. A contractor who shows up with a stock frame and a hammer drill is going to have a bad day. We don’t.
Because Palm Springs has effectively no new construction, county permitting is a constant on these jobs. The village itself doesn’t run a separate building department for window work in most cases, but Palm Beach County reviews every permit against the wind-borne debris provisions of the Florida Building Code. We pull permits on every custom or geometric replacement, and we pull them before the glass is fabricated, so there’s no re-order waiting on a county correction. Septic and well locations rarely move the price on window work, but grading and drainage around the foundation can: if a low window sits near a perpetually wet wall, we’ll flag the drainage issue before we quote, because water and a fresh buck frame don’t mix.
Here’s the vignette from the field. On a 1950s CBS ranch off Congress Avenue in the 33406 zip, our crew converted a row of original jalousie windows into PGT custom impact-rated units. The existing jambs were 2-1/2 inches deeper than standard, so we fabricated custom extension jambs and specified laminated glass interlayers with large-missile ratings to meet Palm Beach County wind-borne debris requirements. The homeowner can now claim the wind mitigation credit under Florida Statute 627.0629 and no longer hears the jalousie louvers rattle in afternoon thunderstorms. That’s the whole job, in one house.
We Also Serve Cities Near Palm Springs
Winslow Windows & Doors works throughout the central Palm Beach County corridor. In addition to Palm Springs, our custom and geometric window crews regularly serve Lake Worth Corridor, Greenacres City, Lake Worth, and Lantana. If you’re in a neighboring community with a similar 1960s CBS house and the same jalousie problem, call us at (844) 901-4551 and we’ll come measure.
Serving Palm Springs, FL — Our Local Coverage Area
We’re based in the Palm Springs area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Custom & Geometric Windows in Palm Springs
In most cases, yes. The existing CBS masonry opening stays as-is, and we fit a properly sized buck frame and custom-ordered impact unit inside it. The catch is that 60-year-old jalousie openings are rarely square, so shimming and a deeper extension jamb are usually required. Call (844) 901-4551 and we’ll tell you exactly what your openings need after a free measure.
Yes. Every permitted replacement, regardless of shape, must meet Palm Beach County’s wind-borne debris requirements under the Florida Building Code. A half-round or circular unit carries the same HVHZ approval obligation as a standard rectangle. We specify laminated impact glass with the correct design pressure rating for every opening, including radius and geometric shapes.
The masonry header is the first thing we inspect. On a 60-year-old ranch, the header may be undersized for today’s wind load once you put heavier impact glass in a wider opening. If it needs reinforcement, that work happens before the window is ordered, so the permit moves cleanly and the wall stays sound. We never cut into a CBS wall wider than the existing opening without engineering review.
Yes, measurably. Jalousie glass has essentially no insulating value and leaks air around every louver. A custom Low-E insulated impact unit seals the opening and reflects solar heat, which cuts cooling load on a Palm Springs ranch immediately. The federal 25C credit covers 30% of product cost up to $600 per year on qualifying units, which helps offset the upcharge for Low-E coatings.
No. Window permits in Palm Springs go through Palm Beach County’s building division, not a separate village process. The county applies the same Florida Building Code wind-borne debris provisions to every address in the 33406 zip. We handle the permit package on our end, including product approvals and design pressure documentation.
Call Winslow Windows & Doors for Custom & Geometric Windows in Palm Springs
The retrofitting playbook for this village is specific: jalousie conversion, non-standard masonry openings, buck framing, and impact ratings that satisfy the county. We’ve been doing it since 2011, and Ed Winslow’s name is still the one on the truck. Call (844) 901-4551 for a free in-home estimate and a written line-item quote. A live person answers, 24/7. Upfront pricing, no surprises on the invoice, and a Done Right Promise on every opening we touch.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Palm Springs and central Palm Beach County since 2011.