Free in-home measure and quote — PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterFast, Reliable Window Installation Across Wilton Manors
Window installation in Wilton Manors runs $800–$1,500 per impact-rated window, with whole-home packages typically landing between $8,000 and $25,000 depending on opening count and product line. Most single-family replacement jobs in the 33305 zip code take one to two days once your units arrive. Call (844) 901-4551 and we’ll send a technician to measure every opening, check for salt corrosion on the existing frames, and hand you a written line-item quote before you spend a dime.
We know Wilton Manors differently than a national chain could. Every street between NE 26th Street and the Middle River sits close enough to brackish water that standard aluminum hardware fails faster here than it does two miles inland in Oakland Park. That changes what we recommend, what we install, and how we flash every rough opening. Ed Winslow’s name is on the door – and on every job we do.
If you’re replacing windows in Wilton Manors, you’re dealing with island conditions: salt-laden humidity, the highest wind-speed design zone in Broward County, and a housing stock full of 1950s and 1960s CBS ranches still holding original jalousie windows. We scope for all three before we quote. Free estimate, no trip charge inside the county, and a live person answers when you call.
Why Winslow Windows & Doors Is Wilton Manors’s Preferred Window Installation Company
We’ve been installing windows and doors across South Florida since 2011, and the jobs that teach you the most are the ones near saltwater. Wilton Manors has more of those than almost anywhere in Broward. Homeowners along NW 29th Court and the North Fork of the Middle River call us about frames that pitted within five years of a paint job, locks that seized from corrosion, and seal failure on single-pane louvered windows that let wind-driven rain into the rear lanai. We’ve seen it enough to stock marine-grade hardware and stainless fasteners on the truck before we arrive.
Every technician who steps onto a Wilton Manors property is background-checked, uniformed, and knows exactly which products carry Florida Product Approvals for this wind zone. We don’t send a salesman with a tablet and a 90-minute pitch. We send an installer who can tell you whether your existing rough opening will accept a PGT 770 casement without reframing, and whether your HOA requires architectural review before the permit gets pulled.
Ed Winslow owns this company and publishes his address and license number. That’s not a marketing line. It means when a Wilton Manors homeowner calls about a warranty question three years after installation, the person responsible for the answer is the same person whose name is on the company. The Done Right Promise backs every installation we complete: if it’s not done right, we make it right.
Key Takeaways for Wilton Manors Homeowners
- Impact windows in Wilton Manors run $800–$1,500 per opening installed; whole-home packages range $8,000–$25,000+.
- Saltwater proximity accelerates aluminum corrosion here faster than inland Broward neighborhoods – marine-grade hardware matters.
- The city requires a building permit for window replacement, and Broward County’s wind zone means impact-rated, NOA-approved products are the only practical path.
- Original jalousie windows are being flagged by insurers during renewal inspections, forcing replacements even when no project was planned.
- Free in-home measure and written quote. Call (844) 901-4551 – a live person picks up, 24 hours a day.
Our Window Installation Services in Wilton Manors
Every window we install in the 33305 zip code gets matched to the opening’s design pressure rating, the home’s exposure to the Middle River or its tidal canals, and the architectural character of the house. A 1958 CBS ranch on a quiet street off NE 6th Avenue needs a different recommendation than a newer two-story near Hagen Park. Here are the styles we install most often in Wilton Manors.
Casement Windows
Casement windows are the workhorse for Wilton Manors homes near the water. The crank mechanism pulls the sash tight against marine-grade weatherstripping, which is exactly what you want when the wind drives rain horizontally off the Middle River. We frequently install PGT 770 impact-rated casements with stainless steel hardware on rear lanais and canal-facing bedrooms. On a 1962 CBS ranch near NW 29th Court backing onto the North Fork, the original aluminum frames had pitted badly within five years, so our crew upgraded to a marine-grade finish and re-flashed every rough opening to current city code before installing laminated impact glass.
Awning & Hopper Windows
Awning windows hinge at the top and open outward, which makes them genuinely useful in Wilton Manors where afternoon thunderstorms roll through fast. You can leave an awning window cracked for ventilation during light rain without water pouring onto the sill. Hopper windows, hinged at the bottom, are common in older CBS ranch homes where they were installed high on walls or in utility rooms. Both styles perform well in small openings where a casement would look oversized, and both can be ordered with impact-rated laminated glass that carries the Florida Product Approval needed for your permit.
Single & Double Hung Windows
Single-hung and double-hung windows remain the most common choice for the front elevations of 1950s and 1960s Wilton Manors homes, mostly because they preserve the clean horizontal lines of the original architecture. Double-hung units let you tilt both sashes inward for cleaning, which matters when your windows face a canal and collect salt film within weeks. If you’re on a tighter budget, single-hung impact units meet code and cut cost because only the bottom sash operates. Both styles are available from PGT and CGI with laminated glass rated for Broward County’s wind zone.
3-Panel Sliding (3-Lite Roller) Windows
Wilton Manors has a lot of living rooms and lanais that were originally built with wide openings facing the water or the backyard. A 3-panel sliding window fills that span with clean sightlines and easy operation. We install these in both impact-rated and non-impact configurations depending on the opening’s exposure, but for any opening facing the Middle River or a tidal canal, we strongly recommend the impact-rated version. The rollers and tracks on canal-front properties need marine-grade materials or they’ll bind within a few years from salt corrosion.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Wilton Manors
We’re authorized installers for PGT, CGI, and CWS, and we stock the hardware and replacement parts that actually age well in a saltwater microclimate. For Wilton Manors homeowners, PGT’s 770 and 5500 series lines cover most casement and single-hung applications, while CGI’s Sentinel line is a strong option for wide sliding openings where you want high design pressure ratings without giving up the view. When a caller on NE 21st Court asks what we’d put on our own canal-front home, the answer is usually a PGT impact-rated casement with stainless hardware and laminated glass. We’ll explain the tradeoffs between brands in plain language when we walk your house.
One note: we only install products from our authorized brand lineup. If someone in Wilton Manors quotes you a window brand we don’t carry, we won’t pretend to be an expert on it. We’ll tell you what we know and what we’d recommend instead.
Common Window Installation Problems We See in Wilton Manors Homes
- Salt-corroded aluminum frames and hardware. Homes within a few hundred feet of the Middle River or its tidal branches show pitting on bare aluminum extrusions and seized steel locks within two to three years. We replace with marine-grade finishes and stainless fasteners as standard on canal-side elevations.
- Failed jalousie window seals on rear lanais. Original single-pane louvered windows let wind-driven rain into the lanai during Broward County’s design storms. We pull the entire jalousie assembly and install impact-rated casements or awnings that actually close tight.
- Insurer-flagged opening protection deficiencies. Citizens and private carriers are increasingly flagging original louvered windows during renewal inspections. That generates an urgent replacement call even when the homeowner had no window project planned – and we handle those on short notice.
- Rough openings that don’t meet current code. When we pull the old window on a 1950s CBS ranch, the rough opening often needs re-flashing, new sill pan, or minor reframing before a NOA-approved impact unit can be seated correctly. We scope that before quoting so the price doesn’t change once work starts.
What Window Installation Costs in Wilton Manors
A typical impact-rated window in Wilton Manors runs $800–$1,500 per window installed. Impact single-hung units fall in the $900–$1,800 range depending on size and design pressure requirements. Large or custom openings – like a wide canal-facing slider or a picture window with fixed transoms – run $2,500–$5,000 per opening. Whole-home packages for a standard three-bedroom CBS ranch here generally land between $8,000 and $25,000+ depending on how many openings, what product line, and how much reframing the rough openings need.
Several things move the price in Wilton Manors specifically. Opening count is the biggest driver. Proximity to the Middle River or tidal canals matters because canal-facing elevations need higher design pressure ratings and marine-grade hardware, which adds cost per unit. Floor height affects both product rating and installation labor. And if your home still has original jalousie windows, expect reframing at those openings because a louvered assembly doesn’t share a rough opening with a modern impact casement. We give you a written line-item quote after a free in-home measure, and that quote won’t change once work starts – no change orders unless you ask for a product substitution.
Florida Pays You Back
Florida and the federal government put real money behind impact window installation, and Wilton Manors homeowners can stack several programs. The My Safe Florida Home program offers matching grants up to $10,000 for qualifying wind-mitigation upgrades, including impact windows and doors. Florida also exempts impact-resistant windows and doors from sales tax, which trims a meaningful percentage off your invoice. On the federal side, the 25C energy credit covers 30% of product cost, up to $600 per year on qualifying energy-efficient units. And after you install impact windows and complete a wind-mitigation inspection (roughly $75–$150), many carriers reduce the windstorm portion of your premium by around 25%. We’ll point you to the programs and document the installation correctly so your paperwork supports every credit and grant you’re eligible for. Final numbers always come from the program administrator or your insurance carrier, not from us.
One comparison worth making here because we hear it from Wilton Manors homeowners every month: impact windows versus hurricane shutters. Shutters cost less up front and sit in a pile in the garage, waiting for you to drag them out, lift them into place, and bolt them down while the wind kicks up. Impact windows are permanent. No panels to store, no aluminum tracks bolted to your facade, no 45-minute installation drill at 2 a.m. when a storm shifts track. For an island city surrounded by water, permanent protection is the choice most homeowners ultimately make. And unlike a big-box retail install where a third-party crew shows up with whatever brand was on sale, a licensed impact specialist matches every opening to its Florida Product Approval and design pressure rating before the order goes in.
Pricing for Window Installation in Wilton Manors, FL
Here’s the honest pricing breakdown for Wilton Manors. A standard impact casement on a 1950s CBS ranch runs $900–$1,400 installed. Impact single-hung runs $900–$1,800, with the higher end representing larger openings on canal-facing elevations. A three-panel sliding window in impact-rated configuration runs $2,500–$5,000 because of the laminated glass area and the structural reinforcement the rough opening typically needs. Awning and hopper windows fall in the $800–$1,300 range for standard sizes. Whole-home packages for a typical three-bedroom, two-bath Wilton Manors ranch with eight to twelve openings land between $10,000 and $20,000, with larger custom homes pushing past $25,000.
What drives cost here beyond product: how many openings need reframing because they currently hold jalousies, whether the home sits within 500 feet of the Middle River or a tidal canal (which bumps design pressure requirements), whether your HOA requires architectural submission, and what frame material you choose. We’ll walk the house, measure every opening, and hand you a written quote. Free estimate. Call (844) 901-4551 and ask for Ed or one of our Wilton Manors installers.
We Also Serve Cities Near Wilton Manors
Our crews work Window Installation in Wilton Manors all week, and we take jobs in the surrounding communities too. That includes Window Installation for homeowners in Sunrise, North Andrews Gardens, Oakland Park, and Lauderdale-by-the-Sea. If you’re a few blocks over the city line, the same crew, the same pricing model, and the same Done Right Promise apply.
Serving Wilton Manors, FL — Our Local Coverage Area
We’re based in the Wilton Manors area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Window Installation in Wilton Manors
Wilton Manors is essentially an island city encircled by the Middle River and tidal canals, which puts nearly every home within a few hundred feet of brackish water. Salt-laden humidity carries chlorides onto bare aluminum extrusions, uncoated steel hinges, and standard window locks, causing visible pitting and binding within two to three years. Homes in inland Oakland Park don’t get that same persistent salt film. The fix is marine-grade finishes, stainless steel hardware, and impact-rated products designed for coastal exposure – which is what we recommend and install on every canal-side elevation. Call (844) 901-4551 for a free assessment of your existing frames.
Wilton Manors itself doesn’t mandate replacement of existing windows, but Broward County’s building code and your insurance carrier will force the issue when you renovate or file a claim. Original single-pane jalousie windows don’t meet current wind-load requirements, so any permitted replacement must use impact-rated, NOA-approved products. And insurers are increasingly flagging louvered windows on rear lanais during routine renewal inspections as an opening-protection deficiency. We’ve handled many Wilton Manors jobs where the homeowner wasn’t planning a window project until the insurance letter arrived. Call (844) 901-4551 and we’ll tell you exactly what your openings need to pass inspection.
Yes. Window replacement in Wilton Manors requires a city building permit, and the products must carry Florida Product Approvals showing they meet the design pressure requirements for Broward County’s wind zone. We pull the permit as part of every installation, schedule the inspection, and make sure the paperwork matches the products we actually install. No shortcuts. If a contractor offers to replace your windows without a permit, walk away. Call (844) 901-4551 and we’ll handle the permit, the product approvals, and the inspection from start to finish.
Yes, and it’ll save you money. A single-hung impact window has only the bottom sash operable, which cuts cost per unit by reducing hardware and weatherstripping complexity. For a 1950s CBS ranch in Wilton Manors where the front windows face the street and the rear windows face a canal, many homeowners put single-hungs on the front and casements or awnings on the canal side where ventilation matters. Both single-hung and double-hung units are available impact-rated from PGT and CGI, and both carry the Florida Product Approvals your Wilton Manors permit requires. We’ll show you both options at your free in-home measure. Call (844) 901-4551.
The answer is in the Florida Product Approval number and the design pressure rating stamped on every unit. Wilton Manors sits in Broward County’s highest wind-speed design zone, so every window we install carries an NOA that matches the specific opening’s design pressure, glass size, and exposure. We don’t sell generic impact windows and hope for the best. We match each opening to a product with the right rating, then we install it to the manufacturer’s NOA specifications with proper flashing, sill pans, and attachment. That’s the difference between a window that carries an impact sticker and one that actually performs when a storm pushes water and wind against your canal-front wall. Call (844) 901-4551 and ask us to walk you through the product approval on your quote.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Wilton Manors and surrounding Broward County communities since 2011.