Free in-home measure and quote — PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterSalt Air Decides Everything: Impact Windows in Melrose Park, FL
In Melrose Park, impact windows are not an upgrade. They are the only permit-legal option. This ZIP sits inside Broward County’s wind-borne debris region, so every replacement window must carry a Florida Product Approval with a Miami-Dade NOA. A typical impact window installation in Melrose Park runs $800–$1,500 per opening, and most whole-home projects land between $8,000 and $25,000 before any grant or tax credit. Call Winslow Windows & Doors at (844) 901-4551 for a free in-home measure and a written quote that accounts for our specific salt-air conditions, not a generic Florida template.
What Salt Air Does to Windows Along the 33308 Corridor
We pulled a set of original jalousie windows from a 1960s CBS ranch off NE 17th Avenue and found the aluminum frames so corroded that the sash corners crumbled in our hands. That is not an outlier. Melrose Park sits roughly two miles from the Atlantic, and the salt-laden breeze works its way into every jamb screw, every hinge pin, every corner weld on aluminum frames. Hardware that would last 25 years in Davie fails here in 10 to 12. We replace those windows with impact-rated units using stainless steel hinges and laminated glass interlayers, because the cheap inland spec costs more within a decade once you factor in the second replacement and the insurance premium you paid while under-protected.
The price gap between a coastal-spec install and an inland-spec install in Melrose Park is real, usually 10 to 15 percent on hardware and frame material alone. Stainless fasteners, marine-grade finishes on clips and receivers, sealed joints at the rough opening. All of it matters when the afternoon sea breeze carries chlorides that eat aluminum oxide layers faster than paint can re-form them. Our Impact Windows team specifies for this environment on every job, because we have seen what the cheaper spec looks like at year eight.
Permit Reality: What Out-of-Town Crews Get Wrong in Melrose Park
Broward County requires a Notice of Commencement for nearly every window and door replacement in Melrose Park. Inspectors here routinely flag jobs where the rough opening was widened without a structural engineer’s sign-off. That single document check kills more final inspections than any other issue we see, and it catches out-of-county crews by surprise every time. If your installer does not know this before they pull the permit, you are looking at a stop-work order, an engineer’s field visit, and re-inspection fees. We pull permits in Broward County as a matter of course, and our crews come from the Miami office knowing exactly what the Melrose Park inspector will ask for before they ever open a wall.
Fast, Reliable Impact Windows Across Melrose Park
Melrose Park homeowners deal with a specific set of conditions: salt air, older CBS construction, and an insurance market that will not renew a policy on a home without full opening protection. We respond to that reality, not a national pitch deck. Our crews know the 1950s ranch layouts, the original jalousie frames still holding on, the stucco surrounds that crack when a rough opening is done wrong. You call (844) 901-4551, a live person answers, and you get a straight answer about your windows, your permit, and your insurance credits. Ed Winslow’s name is on the business. That means someone accountable picks up the phone.
Why Winslow Windows & Doors Is Melrose Park’s Preferred Impact Windows Company
We have been installing impact-rated windows and doors since 2011, and our work in the 33308 corridor has taught us things no product catalog ever will. We know that the wind-load requirements on a single-story CBS ranch near the Middle River differ from a two-story on the eastern edge of the ZIP. We know which PGT, CGI, and ES Windows configurations carry the Florida Product Approval numbers that satisfy Broward County inspectors on the first pass. And we know that a homeowner who has been burned by a vague estimate wants to see line items, not adjectives. Every quote we write for Impact Windows in Melrose Park is itemized, fixed, and backed by the Done Right Promise. If it is not done right, we make it right. Period.
Our technicians are background-checked and arrive in uniform. The truck that pulls up to your house on NE 18th Avenue or along Riverland Road is the one you were told to expect. Calls are answered by a live person, 24 hours a day, every day. No voicemail loop. No call center. Ed Winslow owns this company, publishes the address, publishes the license number, and stands behind what his crews install.
Our Impact Windows Services in Melrose Park
Impact Windows – PGT WinGuard
PGT WinGuard is the most common line we install in Melrose Park, and for good reason. The aluminum frames come with a finish that holds up better against salt-air oxidation than most competitors, and the laminated glass carries a Miami-Dade NOA that Broward County accepts without question. For a 1960s CBS ranch with original single-pane sliders, WinGuard is the fastest path to a wind-mitigation credit that actually moves the insurance needle.
Impact Windows – CGI Sentinel
CGI Sentinel is what we recommend when a Melrose Park home sits on the eastern side of the ZIP, closer to the Intracoastal, where exposure is highest. The Sentinel line is built heavy, with design pressures that comfortably clear the HVHZ requirements for openings within two miles of the coast. Homeowners on NE 15th Avenue and NE 16th Court who want the strongest aluminum frame we can spec usually end up here.
Impact Windows – ES Windows
ES Windows is our go-to when a Melrose Park homeowner wants the impact rating without giving up the view or the look of a slimmer profile. These units perform well in salt-air environments when paired with stainless hardware, which is exactly how we install them. For larger picture windows facing the water, the ES line gives you large-missile protection with a cleaner sightline than chunkier alternatives.
Impact Window Replacement for Original Jalousie and Aluminum Sliders
Most of the replacement work we do in Melrose Park starts with windows that are completely non-compliant with current Broward County code. Original jalousie windows offer zero large-missile protection and no insurance credit. Single-pane aluminum sliders from the 1970s are barely better. We remove these, address any stucco repair needed at the rough opening, install the impact-rated unit, and make sure the permit closes without an engineer’s field trip.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Melrose Park
Winslow Windows & Doors is an authorized installer for PGT, CGI, CWS, ES Windows, and ECO Window Systems, among others. For Melrose Park specifically, we keep the practical reality in mind: salt air punishes cheap hardware, and Broward County inspectors check design pressure documentation on every opening. That is why we lean on PGT, CGI, and ES Windows for most 33308 jobs. We order directly from the manufacturer, track fabrication timelines, and schedule installation the moment your units land at our warehouse. No third-party drop-shipping, no guesswork on lead times.
Common Impact Windows Problems We See in Melrose Park Homes
- Salt-air corrosion on jamb screws and corner welds. Aluminum frames within two miles of the Atlantic develop pitting and powdery oxidation within 8 to 10 years. The sash binds, the design pressure test fails, and the window no longer counts as protection for insurance purposes.
- Original jalousie windows flagged during remodels. If a Melrose Park homeowner remodels without replacing jalousie or single-pane sliders, Broward County’s permit system flags the job for missing large-missile protection, which stops final inspection until the openings are brought to code.
- Cracked stucco surrounds from improper rough-opening widening. Out-of-county crews who widen openings without an engineer’s sign-off almost always leave cracks along the stucco. The Melrose Park inspector sees the crack, asks for the letter, and the permit stalls.
- Failed hardware on windows that are only 10 to 15 years old. The corrosion cycle here is faster than the product warranty suggests. We routinely replace operators, hinges, and receivers on mid-life windows whose frames are fine but whose hardware has been eaten by chlorides.
Pricing for Impact Windows in Melrose Park, FL
A standard impact window install in Melrose Park runs $800 to $1,500 per opening. Impact single-hung units typically land between $900 and $1,800. Large or custom openings, the kind you find on the eastern side of the ZIP where homeowners wanted a bigger view of the water, run $2,500 to $5,000 each. A whole-home package on a 1950s CBS ranch with 8 to 14 openings generally falls between $8,000 and $25,000.
What moves the price in Melrose Park: the number of openings, your distance from the coastline, the frame material you choose, and whether the rough opening needs structural work after decades of salt-air wear. We give you a free in-home measure and a written, itemized quote before any work starts. Call (844) 901-4551 to schedule yours.
What Impact Windows Costs in Melrose Park
Impact windows in Melrose Park run $800 to $1,500 per window installed for standard sizes. Impact single-hung units range from $900 to $1,800. Large or custom openings, picture windows, and second-story work push into the $2,500 to $5,000 range per unit. Whole-home packages on typical 33308 ranch homes land between $8,000 and $25,000 or more, depending on opening count and wind zone. Melrose Park’s location inside the HVHZ wind-borne debris region means you cannot legally install a non-impact window here, so the comparison is not impact versus standard. It is impact versus impact, and the difference is who installs it, what hardware they use, and whether the permit closes clean. We give you a free in-home measure and a written quote with fixed pricing. No change orders because someone guessed wrong about your rough opening.
Florida Pays You Back
The incentives for impact windows in Melrose Park stack higher than most homeowners realize. My Safe Florida Home offers matching grants up to $10,000 for qualifying wind-mitigation upgrades, and impact windows are one of the covered improvements. Florida also exempts impact-resistant windows and doors from sales tax. On the federal side, the 25C energy credit returns 30 percent of the product cost, up to $600 per year, on qualifying units. And after a wind-mitigation inspection, which typically costs $75 to $150, many homeowners see windstorm-premium credits averaging around 25 percent on the windstorm portion of their policy. We do not guarantee any of these numbers. The programs and carriers set the final figures. But the stack is real, and a Melrose Park homeowner who replaces every opening often recovers a meaningful portion of the project cost within a few years.
One comparison we make often in Melrose Park: impact windows versus hurricane shutters. Shutters require someone home to deploy them, they do nothing for year-round energy efficiency, and they do not qualify for the same insurance credits in many cases. Impact windows are permanent protection. No panels to hang. No storage. No forgetting to close them before the storm bands arrive.
We Also Serve Cities Near Melrose Park
Our Melrose Park crews also cover Fort Lauderdale, Broadview Park, Davie, and Lauderhill. If you live just outside the 33308 ZIP but still deal with the same salt-air corrosion and Broward County permit requirements, call (844) 901-4551 and we will let you know when we are in your neighborhood next.
Serving Melrose Park, FL — Our Local Coverage Area
We’re based in the Melrose Park area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Impact Windows in Melrose Park
Yes, impact windows are required for any replacement window in Melrose Park. The 33308 ZIP sits inside Broward County’s wind-borne debris region, which means every new or replacement window must carry a Florida Product Approval with a Miami-Dade NOA. You can keep your existing jalousie windows if they are not being replaced, but they offer zero large-missile protection and no insurance credit. Once you touch them, impact-rated glass is the only permit-legal option.
Impact windows add meaningful insulation to a 1950s CBS ranch, primarily because they replace single-pane glass with laminated insulated units and seal the gaps that original jalousie frames leave open. Most Melrose Park homeowners see a noticeable drop in afternoon heat gain, especially on western-facing walls. Your cooling bill will drop, but the bigger financial win is usually the insurance premium credit, which often outweighs the energy savings. Call (844) 901-4551 for an in-home measure and we will point to the specific openings that are costing you the most.
Broward County requires a Notice of Commencement for nearly every window and door replacement, and inspectors specifically check for a structural engineer’s sign-off when a rough opening has been widened. This is not a Melrose Park-specific rule, but it is enforced here more strictly than in counties without wind-borne debris requirements. The engineer’s letter confirms that the widened opening does not compromise the wall’s shear capacity. Skip it, and your permit will not close. We handle this paperwork on every job.
Yes, it is normal here and not normal inland. Melrose Park sits roughly two miles from the Atlantic, and salt-laden air accelerates aluminum oxidation significantly. Frames that would last 20 to 25 years in Davie or Lauderhill can show heavy pitting and powdery residue within a decade here. The corrosion eats jamb screws and corner welds first, which is why we install impact windows in Melrose Park with stainless steel hardware and marine-grade finishes on every exposed fastener.
It will usually save you money, and it is not a sales pitch. After a wind-mitigation inspection, which costs $75 to $150, many Melrose Park homeowners see their windstorm premium drop by around 25 percent. We have watched customers save over $1,400 a year after replacing original jalousie windows with PGT impact-rated units. The exact credit depends on your carrier and your home’s construction, so we never quote a specific number for you. But the direction is consistent: full opening protection lowers your windstorm exposure, and insurers price that in.
Call Winslow Windows & Doors for Impact Windows in Melrose Park
If you live in Melrose Park and your windows are original jalousies, pitted single-pane sliders, or just plain tired, call (844) 901-4551. A live person answers. We schedule the free in-home measure, write the itemized quote, pull the Broward County permit, and install impact windows that will actually close the permit and move your insurance premium. The one down the road. Ed’s name is on the door, and on every job we do.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Melrose Park with impact windows since 2011.